-
| Part | |
|---|---|
| Description | |
|---|---|
| Alternate | |
|---|---|
|
|
|
|
|||
| Filters |
 Part No
|
 Description
|
 Alternate Supplier
|
 Clear |
 Add New Part Request |
| Sort by | Part No |
Description |
Alternate Supplier |
| Part No | Description | |
XXX | XXX |
| Alternative Supplier A | Alternative Supplier B | Alternative Supplier C |
XXX | XXX | XXX |
| Alternative Part No A | Alternative Part No B | Alternative Part No C |
XXX | XXX | XXX |
| Notes | ||
| Part No | Description | Alternate Supplier | Notes |
|---|---|---|---|
| 06-654 | XS SILENCER SPRING | Test amendment D by CS 161225 | |
| 06-654D | Old Round Classic Exhaust Spring | ||
| 06-655 | CLASSIC SILENCER SPRING | ||
| 1/4-turn-fastener | 1/4 TURN FASTENER KIT | www.southco.com | Southco make a range of different length DZUS Lion 1/4 turn Studs. Search for 82-28-260-16 in the search bar of Southco's Website to see the full range of options: |
| 12-12000 | NO 2 SWAGE IT TOOL | Various CAR DIY | |
| 122BMC | BRAKE MASTER CYLINDER | www.kartcomponents.com/ | No longer made but enquire as they may carry old stock. Alternatively, ask if other Members carry spares. Europa sell replacement seals compatible with both fluid types (DOT4 - alcohol based, and DTD585 - Red mineral oil) - see Europa PN's 2-222EP and 2-222. |
| 122BPAB | BRAKE PIPE ASSEMBLY | www.kartcomponents.com/ | No longer made but enquire as they may carry old stock. Alternatively, ask if other Members carry spares. |
| 122BPAC | BRAKE PIPE ANGLE CONNECTOR | Kart-components | |
| 1460-BRONZE | WINDSCREEN BRONZE | lpaero.com/ | Manufactured by LP Aeroplastics Inc in the USA. There are a few new ones held by Club Members in the UK |
| 1460-SOLAR-GRAY | WINDSCREEN | lpaero.com/ | Manufactured by LP Aeroplastics Inc in the USA. |
| 1461-BRONZE | PORT WINDOW | lpaero.com/ | Manufactured by LP Aeroplastics Inc in the USA. Parts Nos LP-1461 BZ for the LH window, and LP-1462 for the RH one 316 dollars each in 2015 There are a few held by Club Members - CS had 3 sets in Dec 2025 |
| 1461-SOLAR-GRAY | PORT WINDOW | lpaero.com/ | Manufactured by LP Aeroplastics Inc in the USA. |
| 1462-BRONZE | STBD WINDOW BRONZE | lpaero.com/ | Manufactured by LP Aeroplastics Inc in the USA. Parts Nos LP-1461 BZ for the LH window, and LP-1462 for the RH one 316 dollars each in 2015 There are a few held by Club Members - CS had 3 sets in Dec 2025 |
| 1462-SOLAR-GRAY | STARBOARD WINDOW | lpaero.com/ | Manufactured by LP Aeroplastics Inc in the USA. |
| 17-7088 | CUP SEAL - FINGER BRAKE | www.kartcomponents.com/ | Kart Components can still sell you a seal kit for their one-shot master cylinders but only compatible for DOT4 (alcohol-based) fluids. email: factory@kartcomponents.com and ask for Daniel |
| 17-7294 | LIP SEAL - FINGER BRAKE | www.kartcomponents.com/ | Kart Components can still sell you a seal kit for their one-shot master cylinders but only compatible for DOT4 (alcohol-based) fluids. email: factory@kartcomponents.com and ask for Daniel |
| 175-601-208 | 5/16inch FORK - 1/4inch PIN | ||
| 1inch HOSE | 1inch BORE FUEL HOSE TYPE 16 UNIVERSAL | Samco | |
| 2-222 | BRAKE CALIPER 0-RING DTD585 (Red Hydraulic Fluid like Aeroshell 40) | Kart-Components | |
| 2-222EP | O RING FOR BRAKE CALIPER DOT 3/4 (Alcohol-based fluids) | Kart-Components | |
| 227-996 | TY-WRAP BASE | uk.rs-online.com/web/ | |
| 230-150 | GASKET RING | Various incl LAS | |
| 243 | THREADLOCK ADHESIVE (10ML) | Various Auto and Eng | Loctite 243 - blue |
| 261-306 | DIODE | uk.rs-online.com/web/ | |
| 261UB-04 | BRASS NUT FOR 268P | Various CAR DIY | |
| 264P-04 | 1/4inch UNION TEE | Various CAR DIY | |
| 268P-04X02 | BRASS MALE STRAIGHT CONNECTOR | Various CAR DIY | |
| 269P-04X02 | 90degree BRAKE ELBOW FITTING | Various CAR DIY | |
| 291-600 | HOSE CLIP 9.1MM-11.0MM | Various CAR DIY | |
| 291-616 | NYLON PIPE CLIP | Various CAR DIY | |
| 291-638 | HOSE CLIP 12.2MM - 14.8MM | Various CAR DIY | |
| 297656 | ROTAX SPARK PLUG 914 | ecclestonaviation.co.uk | DCPR9E for the 114HP Rotax 914 Engine. To fit the Rotax plug cap, they must have the screw-on/removable electrode cap. Eurocarparts also carry these occasionally |
| 317-443 | PRESSURE SWITCHES | uk.rs-online.com/web/ | This switch is the one used for the stall-warner device. |
| 317-594 | TCU CONTROL (DPDT) LATCHING SWITCH | uk.rs-online.com/web/ | |
| 317-601 | LATCHING TOGGLE SWITCH FOR ROTAX 914 TCU SERVO | RS Components | |
| 320-017 | FUEL PUMP SWITCH SPST | uk.rs-online.com/web/ | |
| 320-225 | ALTERNATOR SWITCH SPST | RS Components | |
| 33-2564 | Air intake plenum - filter element | www.demon-tweeks.com/uk/catalogsearch/result/?q=GREP360270 | Ashleigh Howells 200826 entry - K and N have removed the original part No from their catalogue but after chatting with Demon Tweaks, they said French "Green Filters" (fits Ford Fiesta and XR2i) and are of the same construction and are available with a 3 week lead time. It is a proven drop in replacement for the original K and N 33-2564 |
| 332C016 | 3/8inch UNC HEX NUT | Various Auto and Eng | |
| 381-8999 | CAPACITOR 22000UF | RS Components | |
| 4-360-07U | 2 1/4inch FUEL PRESSURE GAUGE (UMA gauge) | Various incl LAS | |
| 428-3-VG | NICROPRESS SLEEVE | Various incl LAS | |
| 45284 | SPIROL PIN 4MM X 20MM HBK | Various Auto and Eng | |
| 4BLPR2.00 | PIP PIN 1/4inch DIA X 2inch LONG | apexindustrialsupply.com/carrlane-ball-lock-pin-cl-4-blpr-2-00/ | These are the longer tailplane pip-pins - check in BMs for detail. |
| 50-613-7612 | XS OIL COOLER | AH Fabrications | https://ahfabrications.co/AH Fabrications can custom build an oil cooler to any size. Setrab Proline 13-row radiator. Widely available including from ebay sources. Ensure you buy genuine Setrab parts. AltB - Demon Tweeks reference was courtesy Kelvin Weston 220626 |
| 51mm ID | Fuel filler hose ethanol resistant | www.viperperformance.co.uk/shop/fuel-hoses-and-fittings/fuel-hoses/flexible-nitrile-fuel-fil | Fluoro-lined silicone hoses (from e.g. Samco) now appear to be bespoke production. Flexible nitrile hose features in Europa MOD79 so could be used for e.g. short filler lengths. |
| 576-513 | INDICATOR LAMP - RED | RS Components | |
| 576-529 | INDICATOR LAMP - AMBER | RS Components | |
| 5MIN | ARALDITE 2012 RAPID EPOXY 30ML | Various - ebay | |
| 603 | LOCTITE 603 - 10ML | Various - ebay | |
| 622-177 | CABLE TIE - MEDIUM | uk.rs-online.com/web/ | |
| 638 | LOCTITE 638 BEARING RETAINER 10ML | www.henkel-adhesives.com/uk/en/product/retaining-compounds/loctite_6380.html | Widely available from other sources |
| 6380-3RM | 3MM THICK BROWN FOAM | www.easycomposites.co.uk/rigid-foams | Factory supplied probably by Trident Foams |
| 6380-5RM | 6380 FOAM - 100inch X 45inch - 5MM | Trident Foams | |
| 6443 | WINTER ASI WITH XS MARKING 80MM | Various incl LAS | |
| 6749 | FUEL SHUT-OFF VALVE (Eaton-Wetherhead) | Eaton Wetherhead | Widely available incl from ebay sources |
| 7443 | ASI WITH XS MARKINGS - 57MM | Various incl LAS | |
| 7X7 | 2.5MM DIA CABLE ST ST | uk.rs-online.com/web/ | |
| 811-800 | MASTER SWITCH DPST | uk.rs-online.com/web/ | |
| 825701 | ROTAX OIL FILTER | www.ecclestonaviation.co.uk | Only use Rotax Genuine |
| 87-1022 | CLASSIC EXHAUST SYSTEM | Alternative suppliers being sought. Rotax exhausts do not have a ball and socket pipe to silencer union like CKT systems do. | |
| 897255 | ROTAX SPARK PLUG 912 UL | airmasters.co.uk/shop | NGK DCPR7E for the 912UL 80HP Engine. To fit the Rotax plug cap, they must have the screw-on/removable electrode cap. Eurocarparts also carry these occasionally |
| 897257 | ROTAX SPARK PLUG 912 ULS | specialaviationservices.co.uk | NGK DCPR8E for the 912ULS 100HP Engine. To fit the Rotax plug cap, they must have the screw-on/removable electrode cap. Eurocarparts also carry these occasionally |
| 912-FPG-PLUMBING | 912/912S FUEL PRESSURE GAUGE PLUMBING KIT | ||
| 912-UL | 912 UL | www.flyventura.co.uk/ | |
| 912-ULS | 912 ULS WITH SLIPPER CLUTCH & LARGE STARTER | www.flyventura.co.uk/ | |
| 912-VDO-LABEL-SET | 912 VDO PANEL ADDITIONAL LABEL SET | ||
| 912S/914-VDO-LAB-SET | 912S/914 VDO PANEL ADDITIONAL LABELS SET | ||
| 914-FPG-PLUMBING | 914 FUEL PRESSURE GAUGE PLUMBING KIT | ||
| 914-UL | 914 UL TURBO ENGINE (INC ENGINE MOUNT) | www.flyventura.co.uk/ | |
| 92125 | BIDIRECTIONAL GLASS CLOTH | Easy Composites | Uniglass 92125 280g/sqm bi-directional woven GF cloth commonly referred to as BID |
| 92145 | UNIDIRECTIONAL GLASS CLOTH | Easy Composites | |
| 93A-302A | SWITCH (FOR FLAP ACTUATOR) | ||
| 940-873 | BANJO BOLT M10X1X30 | ecclestonaviation.co.uk/rotax-genuine-spares/ | |
| 956-314 | HOSE NIPPLE 4/6 | ecclestonaviation.co.uk/rotax-genuine-spares/ | |
| 963-145 | IDLE JET | ecclestonaviation.co.uk/rotax-genuine-spares/ | |
| A-600 | HYDRAULIC BRAKE RESERVOIR | Matco? | |
| A31-1.2MM-ROD | A31 WELDING ROD | Welding suppliers | |
| AGS | 1551-3 SAFETY PIN | Various incl LAS | |
| AIC040604 | OILITE BUSH - 1/4 X 45872 X 45748 | oilite.com/ | CS carries a few |
| AIC060816 | OILITE BUSH - 1/2 X 45872 X 1 | oilite.com/ | CS carries a few |
| AIC060820 | OILITE BUSH - 1/2 X 45872 X 1.25 | oilite.com/ | CS carries a few |
| AIC162012 | OILITE BUSH 1inch X 1 1/4inch X 3/4inch | oilite.com/ | CS carries a few |
| AJ050804 | HEADED BUSH | None | Factory - supplied part but check Members surplus? |
| AJ050808 | HEADED BUSH | None | Factory - supplied part but check Members surplus? |
| AK-REV0 | ANTENNA KIT @ 01/07/95 | ||
| ALL-WEATHER-COVERS | XS ALL WEATHER COVERS | www.sky4pilots.co.uk/product-page/europa-full-set-of-outdoor-covers-in-stratus-pro | Sky4pilots will provide a 15% discount for Europa Club Members ordering from them. Use code EUROPA15 (valid 2025) |
| ALT-10000-2.25 | ALTIMETER 10000FT 2.25inch DIA | Various incl LAS | |
| ALT-20000-2.25 | ALTIMETER 20000FT 2.25inch DIA | Various incl LAS | |
| AMPREG | AMPREG 21 RESIN and STD HARDENER 3.6KG PACK [CHANGED SPEC] | www.ecfibreglasssupplies.co.uk/gurit-epoxy-resins | Spec was changed by Europa Aircraft in Nov 2023 to AMPREG-30. Europas Letter (login reqd) can be found at: https://www.europa-aircraft.co.uk/uploads/1/1/1/3/111318979/letter_002_-_approved_resin_systems__2_.pdf |
| AMPREG-S | AMPREG 21 RESIN & SLOW HARDENER 3.6KG PACK [CHANGED SPEC] | www.ecfibreglasssupplies.co.uk/gurit-epoxy-resins | Spec was changed by Europa Aircraft in Nov 2023 to AMPREG-30. Europas Letter (login reqd) can be found at: https://www.europa-aircraft.co.uk/uploads/1/1/1/3/111318979/letter_002_-_approved_resin_systems__2_.pdf |
| AN100-C4 | RUDDER CABLE THIMBLE | www.lasaero.com/products/section/HW/ | |
| AN115-21 | SHACKLE | www.lasaero.com/products/section/HW/ | |
| AN210-2A | RUDDER CABLE PULLEY | www.lasaero.com/products/section/HW/ | |
| AN3-10A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-11A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-12A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-13A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-14A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-15A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-17A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-20A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-21A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-23A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-27A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-3A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-4A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-5A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-6A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN3-7A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN310-4 | NUT - CASTELLATED | www.lasaero.com/products/section/HW/ | |
| AN310-5 | NUT - CASTELLATED | www.lasaero.com/products/section/HW/ | |
| AN310-8 | 1/2inch UNF CASTLE NUT | www.lasaero.com/products/section/HW/ | |
| AN316-4R | CHECKNUT | www.lasaero.com/products/section/HW/ | |
| AN316-5R | CHECKNUT | www.lasaero.com/products/section/HW/ | |
| AN316-8 | CHECK NUT 1/2inch UNF | www.lasaero.com/products/section/HW/ | |
| AN363-428 | 1/4inch STIFFNUT | www.lasaero.com/products/section/HW/ | |
| AN4-10 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-10A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-11 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-11A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-12A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-13A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-14A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-15A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-16A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-17A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-20 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-20A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-21 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-23 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-31A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-32 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-5A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-6A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN4-7A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN470-AD4-10 | RIVET | www.lasaero.com/products/section/HW/ | |
| AN470-AD4-7 | RIVET | www.lasaero.com/products/section/HW/ | |
| AN486-2P | FORK ROD END | www.lasaero.com/products/section/HW/ | |
| AN490HT10P | THREADED INSERT | www.lasaero.com/products/section/HW/ | |
| AN490HT11P | THREADED INSERT | www.lasaero.com/products/section/HW/ | |
| AN490HT8P | THREADED INSERT | www.lasaero.com/products/section/HW/ | |
| AN4H-22A | UNF 2-9/32 DRILLED HD BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-10A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-11A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-12A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-16A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-17A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-21A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-23 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-23 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-23A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-40 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-41 | BOLT | www.lasaero.com/products/section/HW/ | |
| AN5-5A | BOLT | www.lasaero.com/products/section/HW/ | |
| AN525-10R10 | SCREW | www.lasaero.com/products/section/HW/ | |
| AN525-10R12 | SCREW | www.lasaero.com/products/section/HW/ | |
| AN525-10R14 | SCREW | www.lasaero.com/products/section/HW/ | |
| AN525-10R16 | SCREW | www.lasaero.com/products/section/HW/ | |
| AN525-10R28 | SCREW | www.lasaero.com/products/section/HW/ | |
| AN525-10R30 | SCREW | www.lasaero.com/products/section/HW/ | |
| AN525-10R8 | SCREW | www.lasaero.com/products/section/HW/ | |
| AN526C1032R8 | SCREW | www.lasaero.com/products/section/HW/ | |
| AN960-10 | WASHER | www.lasaero.com/products/section/HW/ | |
| AN960-10L | WASHER | www.lasaero.com/products/section/HW/ | |
| AN960-2016 | TG MAIN GEAR AXLE WASHER | www.lasaero.com/products/section/HW/ | |
| AN960-416 | WASHER | www.lasaero.com/products/section/HW/ | |
| AN960-416L | WASHER | www.lasaero.com/products/section/HW/ | |
| AN960-516 | WASHER | www.lasaero.com/products/section/HW/ | |
| AN960-516L | WASHER | www.lasaero.com/products/section/HW/ | |
| AN960-516L | WASHER | www.lasaero.com/products/section/HW/ | |
| AN960-816L | SHIM WASHER | www.lasaero.com/products/section/HW/ | |
| AN970-3 | WASHER | www.lasaero.com/products/section/HW/ | |
| AN970-4 | WASHER | www.lasaero.com/products/section/HW/ | |
| AP-P0074 | AIRMASTER BLADE FERRULE | www.propellor.com/ | EU Contact is Dirk Oyen - on the Club WhatsApp group or: Dirk Oyen Hemelrijk 61 3550 Heusden-Zolder E-mail : dirk.oyen1@ gmail .com |
| AP-P0096 | WARP DRIVE STD BLADE NICKEL EDGE (3 BLADES) | warpdriveinc.com/ | Technical support (Nick and others) is very good. email: contact@warpdriveinc.com |
| AP-P0187 | BRUSHES FOR AP308 HUB | Airmaster ONLY | |
| AP-P0187 | BRUSHES FOR AP332 PROPELLER | Airmaster ONLY | |
| APCSC | AIRMASTER PROPELLER CLASSIC CONSTANT SPEED | www.propellor.com/ | EU Contact is Dirk Oyen - on the Club WhatsApp group or: Dirk Oyen Hemelrijk 61 3550 Heusden-Zolder E-mail : dirk.oyen1@ gmail .com |
| APCSCTP | AIRMASTER PROPELLER CLASSIC CONSTANT SPEED -Tapered Blades | www.propellor.com/ | EU Contact is Dirk Oyen - on the Club WhatsApp group or: Dirk Oyen Hemelrijk 61 3550 Heusden-Zolder E-mail : dirk.oyen1@ gmail .com |
| APCSXS | AIRMASTER PROPELLER (XS) CONSTANT SPEED STD BLADES | www.propellor.com/ | EU Contact is Dirk Oyen - on the Club WhatsApp group or: Dirk Oyen Hemelrijk 61 3550 Heusden-Zolder E-mail : dirk.oyen1@ gmail .com |
| APCSXS/NB | AIRMASTER PROPELLER XS CONSTANT SPEED NO BLADES | www.propellor.com/ | EU Contact is Dirk Oyen - on the Club WhatsApp group or: Dirk Oyen Hemelrijk 61 3550 Heusden-Zolder E-mail : dirk.oyen1@ gmail .com |
| APCSXSTP | AIRMASTER PROPELLER XS CONSTANT SPEED Tapered Blades | www.propellor.com/ | EU Contact is Dirk Oyen - on the Club WhatsApp group or: Dirk Oyen Hemelrijk 61 3550 Heusden-Zolder E-mail : dirk.oyen1@ gmail .com |
| ASI-180-2.25 | ASI 180 KTS 2.25inch DIA | LAS & Others | |
| B01P | PORT BRAKE MASTER MTG BRACKET | None | Factory Only - but Member-held surplus? |
| B01S | STBD BRAKE MASTER MTG BRACKET | None | Factory Only - but Member-held surplus? |
| B02 | BRAKE PEDAL LEVER | None | Factory-supplied part - but ask for Member surplus? |
| B03 | BRAKE PEDAL MTG PLATE | None | Factory-made part only - but Member surplus? |
| B04 | BRAKE PEDAL MTG | None | Factory-supplied part - but ask Members about any surplus? |
| B05 | BRAKE PEDAL MTG BKT TOP PLATE | None | Factory-made part only - but Member surplus? |
| B06 | BRAKE LEVER TRI-GEAR | None | But easily made from flat steel |
| B07 | INNER BRAKE LEVER TRI-GEAR | ||
| B08 | OUTER KNOB - HANDBRAKE | None | But easily fashioned by the builder |
| B09 | INNER KNOB - HANDBRAKE | None | But easily fashioned by the builder |
| B10 | PARKING BRAKE LEVER | ||
| B11 | PARKING BRAKE KNOB | None | But easily fashioned by the builder |
| B12 | PARKING BRAKE MTG BRACKET | ||
| B13 | SLOTTED PLATE - PARK BRAKE | None | Factory-made part only - but can be fabricated or from a Members surplus? |
| B14 | COVER PLATE (912 ENG) | None | Factory-made part only - but Member surplus? |
| B15 | FRONT MOUNTING | ||
| B16 | REAR MOUNTING | ||
| B17 | PIVOT | ||
| B18 | SPACER | ||
| B19 | SPACER | ||
| B1RM | 10 MM DIA AL ROUND BAR | ||
| B20 | SPACER | ||
| B21 | SPACER | ||
| B22 | PARK BRAKE BRACKET | ||
| B23 | PARK BRAKE LEVER | ||
| B24 | SLOTTED PLATE - PARK BRAKE (914 ENG) | None | Factory-made part only - but can be fabricated or from a Members surplus? |
| B4RM | 6082-TF 3/8inch X 3/16inch FLAT BAR | ||
| BATTERY-TRAY-ASSEMBY | BATTERY TRAY AND STRAP | ||
| BC4W10 | BEARING (Bellcrank) | www.lasaero.com/products/article/K02ZSTR3H | Widely available - including from reputable ebay aviation surplus sources |
| BEA1001/1.6M | XS CHOKE CABLE | ||
| BERINGER-WHEEL | BERINGER WHEEL & BRAKE SYSTEM - MONO | www.beringer-aero.com/en | |
| BLS4R11N | PIP PIN | www.lasaero.com/products/article/I04HINLDP | Rear Wing pip-pin as referenced in BM's for all variants & the MOD52 detail. 1/4 inch in diameter. Critical pin so check materials are aviation-spec hardness (use a certified source). Has a NATO stock number: 5315-00-898-0597 |
| BLS4R17N | PIP PIN | pi-pins.com/ | |
| BLS4R18N | PIP PIN | Undefined so far | |
| BRAKE-BLEED-KIT | BRAKE BLEEDING KIT | ||
| BRAKE-PAD | Europa MONO Brake Pads | www.lasaero.com/products/article/B0389308F | Amendment submitted 16-10-25 by Chris Larkins for Mono Brake Pad linings. Read the LAS page at the link and it suggests these linings/pads DO NOT come with the required rivets (but a source is referenced on the LAS page). Airpart is also listed. Feedback requested on if either of these parts prove to be unsuitable, please |
| BRAKE-RIVET | BRAKE PAD RIVET LONG | www.lasaero.com/products/article/J0498LW3J | MSC4-4 (short) and MSC4-6 (long) rivets are used with the Matco Tri calliper units |
| BRAKE-RIVET-(S) | BRAKE PAD RIVET SHORT | www.lasaero.com/products/article/J0498LW3J | MSC4-4 (short) and MSC4-6 (long) rivets are used with the Matco Tri calliper units |
| BRAKE-RIVET-PUNCH | BRAKE RIVET PUNCH SET | Press method preferred | |
| BRS1959 | Door seals | Woolies-trim.co.uk | Europas Part number is for a supplier called Kopak Ltd. AB and AT report the seal strip Part No 265A from Woolies, works well. About 7M was ordered to refit two doors. On 220625 Tom Koochitt recommended door seal/gasket from Supplier C On 080725 John Archer recommended: https://edgetrims.co.uk/product/20mm-x-14mm-rubber-car-door-seal/ |
| BRUSH-1inch | 1inch WIDE LAMINATING BRUSH | www.easycomposites.co.uk/product-search?keywords=laminating brushes | |
| BRUSH-2inch | 2inch WIDE LAMINATING BRUSH | Easy Composites | It's always worth buying such brushes from Composite suppliers - they are of the right quality and usually the cheapest as well. |
| BS-010-EP | O RING SEAL | ||
| BS-214 | NITRILE O RING | Nitrile Spec | |
| BS113 | NITRILE O'RING FOR 122BMC DTD585 | ||
| BS116 | BRAKE PIPE (BLACK PLASTIC) | 1/4inch OD - Matco | |
| BS120 | SPRING NUT (FOR BRAKE PIPE) | 1/4inch OD - Matco | |
| BULB | 5/16inch PRIMER BULB | Rubber - for LR Tank? | |
| C01 | INLET HOSE - COOLING RADIATOR | ||
| C02 | OUTLET HOSE - COOLING RADIATOR | ||
| C03 | CLASSIC RADIATOR HOSE | ||
| C04-SILICONE | XS RADIATOR HOSE | ||
| C05 | RADIATOR HOSE | ||
| C05-SILICONE | XS RADIATOR HOSE | ||
| C06-SILICONE | XS OIL COOLER HOSE | ||
| CASTLE-NUT | 1/2inch UNF CASTLELATED NUT | www.lasaero.com/products/section/HW/ | |
| CAV-110 | SAF-AIR DRAIN VALVE | LAS & Others | |
| CB-10A-R | 10 AMP CIRCUIT BREAKER - ROUND | bandc.com/product/circuit-breakers-1a-through-25a/ | |
| CB-1A-R | 1 AMP CIRCUIT BREAKER - ROUND | bandc.com/product/circuit-breakers-1a-through-25a/ | |
| CB-1A-S | 1 AMP CIRCUIT BREAKER - SQUARE | bandc.com/product/circuit-breakers-1a-through-25a/ | |
| CB-25A-R | 25 AMP CIRCUIT BREAKER - ROUND | bandc.com/product/circuit-breakers-1a-through-25a/ | |
| CB-2A-R | 2 AMP CIRCUIT BREAKER - ROUND | bandc.com/product/circuit-breakers-1a-through-25a/ | |
| CB-2A-S | 2 AMP CIRCUIT BREAKER - SQUARE | bandc.com/product/circuit-breakers-1a-through-25a/ | |
| CB-5A-S | 5 AMP CIRCUIT BREAKER - SQUARE | bandc.com/product/circuit-breakers-1a-through-25a/ | |
| CB-8A-S | 8 AMP CIRCUIT BREAKER - SQUARE | bandc.com/product/circuit-breakers-1a-through-25a/ | |
| CD1 | TOP PLATE | None | Factory-made part only - but from Members surplus? |
| CD1-912S | TOP PLATE - 912S | None | Factory-supplied part only - but check for Members surplus? |
| CD1-914 | TOP PLATE - 914 | None | Factory-supplied part only - but check for Members surplus? |
| CD2 | STARBOARD SIDE PLATE | None | Factory-supplied part only - but check for Members surplus? |
| CD3 | PORT SIDE PLATE | None | Factory-supplied part only - but check for Members surplus? |
| CD4 | STARBOARD MOUNTING PLATE | None | Factory-supplied part only - but check for Members surplus? |
| CD5 | PORT MOUNTING PLATE | None | Factory-supplied part only - but check for Members surplus? |
| CD6 | PLENUM CHAMBER MAIN PLATE | None | Factory-supplied part only - but check for Members surplus? |
| CD7 | PLENUM CHAMBER TOP PLATE | None | Factory-supplied part only - but check for Members surplus? |
| CD8 | EXHAUST HEAT SHIELD | www.heatshieldings.com/en/61-x-17-cm-double-layer-aluminum-heat-shield.html | Recommended by Jeroen Glazener 221025. Cut the supplied double-layered Aluminium heatshield to size, then secure with existing CKT heatshield clips. The original shield is 280mm x 180mm so check the supplier will send that size of new material or larger. |
| CH-912-3 | CARB HEAT KIT 912-912S-914 | Ecclestone | |
| CK3125-H | CHECK VALVE - 5/16inch HOSE | ||
| CLASSIC-SPINNER-KIT | CLASSIC SPINNER KIT | None | Factory-supplied part - but check for Members surplus |
| CLECO | TEMPORARY FASTENER | Various A/C Hardware | |
| CLIP00 | 13 - 20 MM HOSE CLIP | Various Car DIY | |
| CLIP000 | HOSE CLIP 000 - 9.5 - 12 MM | Various Car DIY | |
| CLIP0X | 19 - 25 MM HOSE CLIP | Various Car DIY | |
| CLIP1 | 25 - 35 MM HOSE CLIP | Various Car DIY | |
| CLIP1X | 35 - 45 MM HOSE CLIP | Various Car DIY | |
| CLIP3 | FUEL FILLER HOSE CLIP | Various Car DIY | |
| CLIP6X | 130 - 150 MM HOSE CLIP | Various Car DIY | |
| CLIPM00 | M00 HOSE CLIP | ||
| CS01 | CONTROL COLUMN BOTTOM FITTING | ||
| CS02 | CONTROL COLUMN FORK | ||
| CS03 | BUSH | None | Factory - supplied part but check Members surplus? |
| CS04 | TUFNOL BEARING | None | For the raw material to fabricate your own, try: https://tufnol.com/fabric-laminates/ |
| CS05 | AILERON TORQUE TUBE 1.25 X 0.049 X 26 | ||
| CS06 | TUFNOL BEARING | None | For the raw material to fabricate your own, try: https://tufnol.com/fabric-laminates/ |
| CS07 | AILERON TORQUE TUBE REAR BUSH | None | Factory - supplied part but check Members surplus? |
| CS08 | CRANK | ||
| CS09/3 | PITCH CROSS TUBE BRACKET | None | Factory Only - but Member-held surplus? |
| CS09B-ASSY | SELF ALINGING BEARING ASSEMBLY | ||
| CS09C | SPACER | ||
| CS10/2 | PITCH CROSS TUBE (POST MOD 76) | ||
| CS11/1 | .625 X .035 X 25.5 FWD PITCH PUSHROD | ||
| CS12 | AILERON LINK ROD 0.5 X 0.035 X 21.85 | ||
| CS13 | AILERON PUSHROD 0.5 X 0.035 | ||
| CS14P | AILERON QUICK CONNECT BRACKET PORT | None | Factory Only - but Member-held surplus? |
| CS14S | AILERON QUICK CONNECT BRACKET STARBOARD | None | Factory Only - but Member-held surplus? |
| CS15P | BELLCRANK - PORT | None | Factory Only - but Member-held surplus? |
| CS15S | BELLCRANK - STARBOARD | None | Factory Only - but Member-held surplus? |
| CS16 | CONTROL COLUMN CRANKED | ||
| CS16B | TUFNOL SPACER FOR CS16 | ||
| CS17-1 | PITCH AFT PUSHROD 6061-T6-1.75inch x .049inch-96inch LONG | ||
| CS17A | PITCH AFT PUSHROD END FITTING | ||
| CS18 | RUDDER PEDAL - OUTER | ||
| CS19 | RUDDER PEDAL - INNER | ||
| CS19A | RUDDER PEDAL BEARING WASHER | None | Factory part only - but Member surplus? |
| CS20 | RUDDER PEDAL FLANGE | ||
| CS21/2 | RUDDER PEDAL CRANK | ||
| CS22 | RUDDER PEDAL HALF BEARING INBOARD | ||
| CS23 | RUDDER PEDAL HALF BEARING OUTBOARD | ||
| CS28 | RUDDER PUSHROD 0.5 X 0.035 X 21.5 | ||
| CS29M77-MOD-77 | RUDDER PUSH ROD FITTING | ||
| CS31 | RUDDER PEDAL REINFORCING TUBE | ||
| CS32 | BULKHEAD BRACKET | None | Factory Only - but Member-held surplus? |
| CS33 | STEERING ARM | ||
| CS34 | TAILWHEEL HORN | ||
| CS35 | TAILWHEEL LIMIT STOP | ||
| CS36 | ACTUATING ARM - ROLL SERVO | ||
| CS37A | SPACER TUBE | ||
| CS37B | SPACER TUBE | ||
| CS37C | SPACER TUBE | ||
| CS38 | PUSHROD - MOD 77 | ||
| DAMPER | HYDRAULIC REBOUND DAMPER | ||
| DECAL-NO | PUSH DECAL - NO PUSH RED | ||
| DECAL-NO | STEP DECAL - NO STEP RED | ||
| DL01 | OUTER HANDLE | ||
| DL02A | Door LATCH PLATE | None | Factory-only supplied part, but check for Member-held surplus? |
| DL02B | BUSH | None | Factory - supplied part but check Members surplus? |
| DL02C | GUIDE ROD | None | Factory-only supplied part, but check for Member-held surplus? |
| DL02P-DOOR-LATCH | MTG PLATE - PORT | None | Factory-supplied part only - but check for Members surplus? |
| DL02S | Door LATCH MTG PLATE - STBD | None | Factory-only supplied part, but check for Member-held surplus? |
| DL03 | INNER HANDLE | ||
| DL04 | SPINDLE | ||
| DL04-LARGE | SPINDLE | ||
| DL05 | SPRING GUIDE | ||
| DL06 | SHOOT BOLT | None | Factory-made part only - but Member surplus? |
| DL07 | SHOOT BOLT GUIDE | None | Factory-made part only - but Member surplus? |
| DL09 | COMPRESSION SPRING | ||
| DL10 | DOOR LATCH GUARD | ||
| DL12 | DOOR LEVER KNOB | ||
| DOOR-LATCH-ASSY-P | DOOR LATCH ASSEMBLY - PORT | ||
| DOOR-LATCH-ASSY-S | DOOR LATCH ASSEMBLY - STBD | ||
| DOOR-LOCK | XS DOOR LOCK | ||
| DOWEL | 1inch OD WOOD DOWEL X 3inch LONG | Various Hardware Stores | |
| E-95633-03 | TYGON TUBE | Tubes Intnl | Specification sheet link here https://www.tubes-international.com/wp-content/uploads/catalogue-en-pdf/hoses_compensators/tygon_tubing.pdf |
| EL01 | WIRING LOOM - MOD 60 | ||
| EL02 | WIRING LOOM FOR MOD 61 INC HORN | ||
| EUR001 | 1/4inch WASHER TABLE 4 - ZNP | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR002 | 5/16inch X 2inch UNF HT SETSCREW | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR003 | 3/16inch X 1/2inch OD WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR004 | 1/2inchX 1-1/2inch ZNP REPAIR WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR005 | 9.5MM BUNGEE - MONO UNDERCARRIAGE | None | Caution with non factory replacements: 1. Correct diameter is needed to fit through the LG frame upper tube and the fuselage moulding 2. EA sell this by length so stiffness is not specified |
| EUR006 | PLAIN WASHER 21MM x 10MM ID | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR007 | SPIROL PIN - 3/16 X 45689 MDK | ||
| EUR008 | TUFNOL - 83 X 75 X 1 MM THICK | ||
| EUR010 | CUDDLE WASHER MATERIAL 1/8inch PLATE | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR011 | 1/8 ID X 3/8 OD .032inch 45870 LIGHT PLAIN TABLE 4 FLAT | ||
| EUR012 | 5/16inch X 1inch WASHER ZNP | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR013 | BUNGEE - 11.5MM TRI SHOCK ABSORBER | None | MOD71 (bungee replacement with springs) is a reliability improvement, but caution with using non factory bungee replacements EA sell this cord by length - so stiffness is not specified |
| EUR014 | 1 1/4inch BMS WASHER LT TBL 3 | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR014/2 | MACHINED WASHER | None | Caution if not from a factory source - as the steel grade & machining requirement is unclear |
| EUR018 | WASHER - 3/8inch PLAIN ZNP | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR020 | 3/16inch X 1inch WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR021 | 3/8inch THIN WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR022 | FRICTION WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR023 | SCREW - 1/4inch UNF X 1 1/2inch ZNP | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR024 | WOODSCREW - NO 8 X 3/4inch BZP ROUND HEAD SLOTTED | none | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR025 | 1.5inch x1/16x16inch LONG EQUAL ANGLE | ||
| EUR026 | 3/8inch UNC X 5inch HT HEX HD BOLT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR027 | 3/8inch UNC NYLOC NUT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR027/2 | 3/8inch UNC BINX LOCKING NUT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR028 | SPLIT PIN 3/32inch X 1 1/2inch SS | ||
| EUR029 | 5/16inch X 2 1/4inch UNC BOLT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR030 | 1/2inch UNF X 1inch S/H CAPSCREW | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR031 | 1/8inch X 1 3/4inch SS SPLIT PIN | ||
| EUR033 | 3/8inch X 1inch REPAIR WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR034 | TW COMPRESSION SPRING | ||
| EUR035 | 3/8inch UNC 4.5inch ZINC PLATED | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR036 | 1/2inch X 1inch ZINC PLATED WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR037 | 3316 PRE ASSEMBLE NUTS | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR038 | GREASE NIPPLE - 1/4inch BSF | ||
| EUR039 | 1/2inch UNC PLAIN NUT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR040 | DUMMY SPAR | ||
| EUR041 | 10 X 1inch SELF TAPPING SCREW PAN POZI | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR043 | 1.5inch EQUAL ANGLE X 1/16inch X 3.25inch ALUMINIUM | ||
| EUR044 | 1/4inch UNF X 2inch SKT HD CAPSCREW | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR045 | 3/16inch UNF X 2inch SKT HD CAPSCREW | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR046 | 1/4inch UNF PLAIN NUT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR047 | 1/2inch UNC BOLT 5inch LONG | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR049 | BROWN FOAM 3MM 10inch X 2inch | ||
| EUR050 | MONO BRAKE MASTER CYL LIPSEAL | Kart-Components | Kart Components can still sell you a seal kit for their one-shot master cylinders but only compatible for DOT4 (alcohol-based) fluids. email: factory@kartcomponents.com and ask for Daniel |
| EUR051 | MONO BRAKE MASTER CYL O-RING | ||
| EUR054 | 12inch LENGTH OF TU43RM SS 0.25 X 0.049 GRADE 304 | ||
| EUR056 | 10-32 UNF ROD 1.5inch LONG | ||
| EUR057 | MDF - 3inch X 2inch X 1/2inch THICK | ||
| EUR058 | 1/4inch UNF THREADED ROD 5inch LONG | ||
| EUR059 | REDUCING TEE - 1/2inch X1/4inch X1/2inch | ||
| EUR060 | SPACER - SEAT BELT | ||
| EUR061 | 5/16inch UNC X 1 1/2inch BOLT ZNP | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR062 | 5/16inch UNF X 1inch C/SUNK BOLT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR063 | 2.5MM ID X 6.5MM OD X 0.5MM WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR064 | EYEBOLT - 7/16inch UNF | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR067 | M12 WASHER FORM C | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EUR068 | PIP PIN - 2inch - DOUBLE ACTING | ||
| EUR069 | S/S M5 x 15 WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| EX08 | TAIL PIPE 914 | Weld repairer | |
| EX912/1 | XS 912 EXHAUST SYSTEM | Weld repairer | |
| EXPANCEL | SURFACE FINISHING FILLER 806 | Various Car DIY | |
| F09 | FUEL TANK | A few spare tanks are held by Members. consider making your own Alu tank if it needs replacing (Club Tech Session for more detail). Europa aave stock of new F09 tanks John Wighton suggested 220626 the mat spec if re-made now, to be Rotomoulding-grade cross-linked polyethylene, XLPE powder, natural or black UV-stabilised, fuel-tank grade, high ESCR suitable for petrol and ethanol blends up to at least E10, with supplier-confirmed compatibility for gasoline, ethanol and avi | |
| F09A | FUEL TANK OUTLET FITTING | ||
| F09B | FUEL TANK VENT FITTING | ||
| F09C | FUEL TANK DRAINABLE HOSE | ||
| F09D | FUEL DRAIN VALVE FITTING | None | Factory-supplied part but ask for Member surplus? |
| F09E-ASSY | F09E FUEL ASSEMBLY | ||
| F10 | FUSELAGE STERNPOST | ||
| F11P | DOOR MOULDING - PORT | ||
| F11S | DOOR MOULDING - STARBOARD | ||
| F14T | TRI GEAR INSTRUMENT PNL | None | Factory-supplied part only - but Member surplus? A modernised replacement panel has been announced by EA |
| F15MOD | ROTAX UPPER COWLING - XS | ||
| F15MOD/A | SPLASH MOULDING 912S/912 UPPER COWL | None | |
| F15MOD/HT | UPPER COWLING - XS HI TOP | ||
| F16MOD | ROTAX LOWER COWLING - XS | ||
| F16MOD/A | SPLASH MOULDING 912S LOWER COWL | None | This is needed to create the extra air-intake in the lower cowling. CS has a spare to loan |
| F17 | CLASSIC SPINNER MOULDING | None | Factory-supplied part - but check for Member surplus? CliveS has 2 spare cone mouldings ex-N Graham |
| F17A | CLASSIC SPINNER BACK PLATE | None | Factory-supplied part only - but check for Members surplus? |
| F17B | CLASSIC SPINNER FRONT PLATE | None | Factory-supplied part only - but check for Members surplus? |
| F19 | FIN TIP | ||
| F23 | XS FUEL INLET HOSE COVER | ||
| F24 | HIGH TOP FUSELAGE SECTION | ||
| F25 | REAR BULKHEAD | ||
| F26 | CEILING PANEL | ||
| F27 | CEILING HEADSET MOULDING | None | Factory-supplied part - but check for Member surplus? |
| F27-HARDWARE | HARDWARE FOR F27 INSTALLATION | ||
| f28 | FINGER BRAKE MOUNTING | ||
| f29 | FINGER BRAKE COVER | ||
| f30p | HEADREST COVER - PORT | ||
| F30S | HEADREST COVER -STBD | ||
| F31 | BATTERY TRAY | ||
| F32 | BATTERY STRAP | ||
| F33P | DOOR LATCH COVER - PORT | ||
| F33S | DOOR LATCH COVER - STBD | ||
| F35P | DOOR RECESS MOULDING PORT | ||
| F35S | DOOR RECESS MOULDING STBD | ||
| F36P | DOOR SILL SPLASH (MOD) PORT | ||
| F36S | DOOR SILL SPLASH (MOD) STBD | ||
| F37P | DOOR STRUT MOULDING - PORT | ||
| F37S | DOOR STRUT MOULDING - STBD | ||
| F38P | DOOR RECESS COVER MOULDING - P | ||
| F38S | DOOR RECESS COVER MOULDING - S | ||
| F39 | CONTROL COLUMN GAITER MOULDING | None | Factory-supplied part - but check for Member surplus? |
| F41 | PUSHROD COVER (MOD 76) | ||
| FIREWALL-FABRIC | FIREWALL FABBRIC X 40inch | ||
| FL1 | FLAP HINGE PLATE | None | Factory-supplied part only - but check for Members surplus? |
| FL10 | SLEEVE | ||
| FL11 | PLASTIC WASHER | None | Factory part only - but Member surplus? |
| FL12 | SLEEVE | ||
| FL13 | SPACER | ||
| FL14 | SPACER | ||
| FL15 | FLAP CROSS TUBE | ||
| FL16 | FLAP HINGE ARM | ||
| FL17 | BEARING HOUSING | ||
| FL17-SPECIAL | LONGER BEARING HOUSING | ||
| FL18P | FLAP HINGE BRACKET | None | Factory Only - but Member-held surplus? |
| FL18S | FLAP HINGE BRACKET | None | Factory Only - but Member-held surplus? |
| FL19/2 | FLAP ACTUATING HORN MTG PLATE | None | Factory-supplied part only - but check for Members surplus? |
| FL2 | FLAP HINGE PLATE | None | Factory-supplied part only - but check for Members surplus? |
| FL20/2 | LA FLAP PUSH ROD | ||
| FL21 | FLAP OPERATING HORN | ||
| FL22 | FLAP OPERATING PIN | None | Factory-only. Check if other Members carry a spare? |
| FL23 | SLEEVE | ||
| FL24 | RETRACTION LEVER GUIDE PLATE | None | Factory-supplied part only - but check for Members surplus? |
| FL25 | RETRACTION LEVER RUBBING STRIP 170 X 25 X 12MM THICK TUFNOL | ||
| FL26 | MOUNTING BKT FLAP ACTUATOR | ||
| FL27/2 | LINEAR ACTUATOR - FLAP DRIVE PUSHFLEX 120S 100MM 12V DC | ||
| FL29 | FLAP ANGLE INDICATOR LABEL | ||
| FL3 | FLAP HINGE PLATE | None | Factory-supplied part only - but check for Members surplus? |
| FL30 | ADAPTOR | ||
| FL7 | PLATE | None | Factory-supplied part only - but check for Members surplus? |
| FL9 | BEARING BUSH | None | Factory - supplied part but check Members surplus? |
| FLCP08 | QUICK RELEASE FUEL LINE COUPLER | Others TBD | |
| FLOX | COTTON FLOCK (1 LB) | Easy Composites | |
| FOAM-1600X150X3MM | MOD 64 KIT | ||
| FS02 | Fuel Flow Restrictor | A very specific hole of 0.028 inches in diameter is a feature of this component, which controls the bypass fuel flow rate relevant to Rotax 912UL and 912ULS engines. No substitutes are therefore acceptable and Europa-supply is the only sensible/safe option. Some Members may carry spares or surplus, though. Ask | |
| FS03 | LONG RANGER TANK (MONO) | ||
| FS04 | LONG RANGER FUEL TANK CAP | ||
| FS05 | VITON RUBBER GASKET | ||
| FS06 | STRAP - LONG RANGER TANK - LONG | ||
| FS07 | STRAP - LONG RANGER TANK - SHORT | ||
| FS08 | SPACING WASHER LONG RANGER TANK | None | Factory part only - but Member surplus? NB: Long ranger tank not permitted in the UK |
| FS09 | SPLIT RING | ||
| FS10 | FUEL LEVEL SENDER WITH 1 GASKET & FLANGE | wema.co.uk/products/fuel-sender | Latest version has 16 points of reference against 8 points on original |
| FUEL-GAUGE | VDO 0-190 OHMS | VDO Instruments | |
| fuel-press-kit-1 | FUEL PRESSURE GAUGE KIT 912/S 2 1/4inch GAUGE | ||
| FUEL-PRESS-KIT-2 | FUEL PRESSURE GAUGE KIT 914 2 1/4inch GAUGE | ||
| FUEL-PRESSURE-KIT-3 | FUEL PRESSURE GAUGE KIT 912S 1 1/4inch GAUGE | ||
| FUEL-PRESSURE-KIT-4 | FUEL PRESSURE GAUGE KIT 914 1 1/4inch GAUGE | ||
| FUNNEL | 160MM DIA FUNNEL | www.lasaero.com/products/article/H01TIVLVP | |
| FW02 | STAINLESS STEEL 12inch X 15inch | ||
| FW03 | STAINLESS STEEL 12inch X 24inch | ||
| G-AMBW | GLIDER AILERON BALANCE WEIGHT FOAM SUPPORT | ||
| GA | 02 G/WING AILERON DRIVE PLATE | None | Factory-supplied part only - but check for Members surplus? |
| GA01 | AILERON PUSH ROD IDLER | ||
| GA04 | LEAD WEIGHT - GLIDER WING | ||
| GAB-04B | GLIDER WING CABLE DRIVE LUG | ||
| GAB-04C | GLIDER WING CABLE DRIVE LUG | ||
| GAB-04D | GLIDER WING END PLATE | None | Factory-supplied part only - but check for Members surplus? |
| GAB01L | BRACKET | None | Factory Only - but Member-held surplus? |
| GAB01R | BRACKET | None | Factory Only - but Member-held surplus? |
| GAB02 | AIRBRAKE CONNECTING LUG | ||
| GAB06 | AIRBRAKE LEVER | ||
| GAB07 | AIRBRAKE BELLCRANK | None | Factory Only - but Member-held surplus? |
| GAB08 | AIRBRAKE STOP SUPPORT | ||
| GAB09 | AIRBRAKE BELLCRANK STOP | None | Factory Only - but Member-held surplus? |
| GAB12 | AIRBRAKE CABLE BRACKET | None | Factory Only - but Member-held surplus? |
| GAUZE | FUEL STRAINER GAUZE | Brass gauze | |
| GE12E | SKF BEARING | indeterminate . . . | |
| GREASE-GUN | 100CC GREASE GUN | Various Car DIY | |
| GS-8699-1 | GAS SPRING | www.sgs-engineering.com/nl5265-europa-aircraft-gas-strut | SGS supply these struts with an improved pin-secured ball-end. Check they are not too long when compressed/door closed, on your aircraft. |
| GS12 | BUSH INNER | None | Factory - supplied part but check Members surplus? |
| GS13 | BUSH OUTER | None | Factory - supplied part but check Members surplus? |
| GS86991-BALL-END | GAS STRUT MALE END FITTING | www.sgs-engineering.com/nl5265-europa-aircraft-gas-strut | |
| GS86991-METAL-ENDS | GAS STRUT ENDS - METAL | www.sgs-engineering.com/nl5265-europa-aircraft-gas-strut | |
| GS86991-PLASTIC-ENDS | GAS STRUT ENDS - PLASTIC | ||
| H-5000-2 | FLUSH LATCH | ebay or AC Spruce | |
| HARNESS | SAFETY HARNESS | trs-motorsport.com | Courtesy of Alan Roberts G-PUDS, TRS Europa Seat Harnesses can now be fitted to LAA aircraft under Std Mod SM16322 (different colours available). Supplier: trs-motorsport.com Contact: James Ledamun Tel: 01302 750800 TRS can also supply the 3 off required steel spacers (Europa Part EUR 060). Manual Ref: Europa CBM 36-2 |
| HEADSET-MOULDING-KIT | HEADSET CEILING PANEL INSTALL KIT | ||
| HEF3-8 | FEMALE SWIVEL STRAIGHT 1/2inch BSP FOR 1/2inch HOSE | ||
| HEF93-8 | FEMALE SWIVEL 90° 1/2inch BSP FOR 1/2inch HOSE | ||
| HFBB-2B-2B | 1/8inch BSP BULKHEAD FITTING | ||
| HFBB-6-6 | 1/4inch HOSE BULKHEAD FITTING | ||
| HFBP-6-6 | BULKHEAD FITTING - 1/4inch HOSE | ||
| HFEP-10-4N | ELBOW - 3/8inch HOSE X 1/4inch NPT | ||
| HFEP-13-6N | ELBOW - 1/2inch HOSE X 3/8inch NPT | ||
| HFEP-16-6N | ELBOW - 5/8inch HOSE X 3/8inch NPT | ||
| HFIP-3-3 | 1/8inch IN LINE CONNECTOR | ||
| HFRP | 6-3 1/4inch- 1/8inch REDUCER | ||
| HFRP-12-8 | 12MM - 8MM REDUCER | ||
| HFRP-5-3 | 5MM - 3MM REDUCER | ||
| HFSA-2N-2N | PIPE COUPLING | ||
| HFSB-3-2B | UNION - 1/8inch HOSE X 1/8inch BSP | ||
| HFSB-6-2B | UNION - 6MM HOSE X 1/8inch BSP | ||
| HFSB-6-2N | UNION - 6MM HOSE X 1/8inch NPT | ||
| HFSB-8-2N | UNION - 8MM HOSE X 1/8inch NPT | ||
| HFSB-8-4N | UNION - 8MM HOSE X 1/4inch NPT | ||
| HFSCB-6x4-2B | 1/8inch BSP STUD COUPLING 6/4 TUBE | ||
| HFSP-10-4N | UNION - 3/8inch HOSE X 1/4inch NPT | ||
| HFSP-3-2N | UNION - 3MM HOSE X 1/8inch NPT | ||
| HFTP-10-6-10 | 10MM X 6MM HOSE REDUCING TEE | ||
| HFTP-3-3-3 | 1/8inch HOSE EQUAL TEE | ||
| HFTP-6-6-6 | 6MM HOSE EQUAL TEE | TEst | |
| HFTP-8-6-8 | 8MM X 6MM HOSE REDUCING TEE | ||
| HFTP-8-8-8 | EQUAL TEE 8MM HOSE FITTING | ||
| HFTS-6-6-6 | EQUAL TEE 6MM | ||
| HOSE-51mmX66mm | PLENUM HOSE | www.autosiliconehoses.com/silicone.html | For the airbox to carburettor connection hoses. Buy 1 90-degree elbow hose and cut off the ends will do this job,. This will leave you with a piece of 90-deg hose to fashion a SB19 test kit to connect to the tank inlet stub. |
| IH-000 | 6MM FUEL HOSE | www.gates.com/us/en/search.html?searchType=product&text=barricade | Gates product code 27313 is for 25ft of 1/4 or 6mm bore fuel hose resistant to ethanol/E5 Mogas. Longer lengths available. About 3M is adequate for a normal 5-yearly Europa hose change. SAE30R14 spec. Its flexible - make generous radii bends using it. |
| IH-001 | 8MM FUEL HOSE | www.gates.com/us/en/search.html?searchType=product&text=barricade | Gates product code 27314 is for 25ft of 5/16 or ~8mm bore fuel hose resistant to ethanol/E5 Mogas. Longer lengths available. About 8M is adequate for a normal 5-yearly Europa hose change. SAE30R14 spec. Its flexible - make generous radii bends using it. |
| IM01B | INSTRUMENT BLANKING PLATE | None | Search for topic on Club website - some DWGs & cutting files available |
| IM01M | INSTRUMENT PANEL CUT OUT MONO | ||
| IM01M-BLANK | INSTRUMENT PANEL BLANK - MONO | none | Search for the topic on the Club website. Some DWGs and cutting files available |
| IM01M-D100 | INSTRUMENT PANEL MONO DYNON | ||
| IM01M-JAB | INST PANEL(MONO) - JABARU | ||
| IM01R | INSTRUMENT REDUCING PLATE | None | Search for topic on Club website - some DWGs & cutting files available |
| IM01T | INSTRUMENT PANEL CUT OUT TRI | ||
| IM01T-D100-V1 | INSTRUMENT PANEL TRIGEAR DYNON VERSION 1 | ||
| IM01T-D100-V2 | INSTRUMENT PANEL TRIGEAR DYNON VERSION 2 | ||
| IM01T-D100-V3 | INSTRUMENT PANEL TRIGEAR DYNON VERSION 3 | ||
| IM01T-NH | INSTRUMENT PANEL CUT OUT TRI- NO HOLES | ||
| IM02B | BLANK FULL DEPTH AVIONICS PANEL | ||
| IM03M-BLANK | ENGINE INSTRUMENT PANEL BLANK - MONO | None | Search for the topic on the Club website. Some DWGs and cutting files available |
| IM03MF | ENGINE INSTRUMENT PANEL MONO/FLYDAT | ||
| IM03MV | ENGINE INSTRUMENT PANEL MONO/VDO GAUGES | ||
| IM03T | ENGINE INSTRUMENT PANEL BLANK | ||
| IM03TF | ENGINE INSTRUMENT PANEL TRIGEAR/FLYDAT | ||
| IM03TV | ENGINE INSTRUMENT PANEL TRIGEAR/VDO GAUGES | ||
| IM04 | BLANK AVIONICS PANEL | ||
| IM04/EP | SHORT AVIONICS PANEL FOR AVMAP | ||
| IM04H | BLANK AVIONICS PANEL WITH 52MM HOLE | ||
| IM05B | BLANKING PLATE FOR AIRMASTER PROPELLER CONTROL HOLES | ||
| IM05M | CONTROL PANEL - MONO | ||
| IM05T | CONTROL PANEL - TRIGEAR | ||
| jamar-to-matco | JAMAR TO MATCO MASTER CYLINDER CONVERSION KIT | ||
| JJ-033 | MICROPHONE PANEL JACK | RS Components | |
| JJ-034 | HEADSET PANEL JACK | RS Components | |
| KLNJ-1-1/2-2RS | MONOWHEEL - Mainwheel sealed Ball-race BEARINGs x 2 | simplybearings.co.uk/shop/ | |
| KNOB-A/B Lever | KNOB FOR AIRBRAKE LEVER | ||
| KNOB-SET-MONO | KNOB SET FOR MONOWHEEL | ||
| KNOB-SET-TRI | KNOB SET FOR TRIGEAR | ||
| LATEX-GLOVES | LATEX GLOVES BOX OF 100 | ebay | |
| LB01 | OIL TANK MOUNTING BRACKET | Rotax | |
| LC-042G-2 | COMPRESSION SPRING FOR FUEL FILTER-STAINLESS | Demon-Tweaks | |
| LG01/3 | UNDERCARRIAGE MOUNTING FRAME - MONO | ||
| LG01B/P | STRUT - PORT - MOD28 | ||
| LG01B/S | STRUT - STBD - MOD28 | ||
| LG01T | MOUNTING FRAME - NOSE GEAR | ||
| LG02/1 | SWINGING ARM | ||
| LG02B | BUNGEE Anchor TUBE | ||
| LG03 | BEARING HALF | ||
| LG04 | SWINGING ARM PIN | ||
| LG05-4 | TOP REACTION PLATE - UNIVERSAL | None | Factory-supplied part only - but check for Members surplus |
| LG06-5 | SHOCK ABSORBER BLOCK (Black) | ||
| LG07-5 | LOWER REACTION PLATE (POST MOD 37) | None | Factory-supplied part only - but check for Members surplus |
| LG08P/1 | RETRACTION LEVER - PORT | ||
| LG08S/1 | RETRACTION LEVER - STARBOARD | ||
| LG09/1 | RETRACTION ARM PIVOT (GROUND) | ||
| LG11 | RETRACTION LEVER SUPPORT STRUT | ||
| LG12 | RETRACTION GEAR LEVER | ||
| LG13 | BRAKE OPERATING LEVER | ||
| LG14-2 | SUPPORT | ||
| LG21 | BRAKE CALIPER SLIDE BRACKET | ||
| LG27 | BRAKE BLEEDER FUNNEL | This is an aluminium machined funnel made only by Europa that is specifically designed to fit into the filling plug hole of the Kart-components master cylinders. An invaluable tool for brake system bleeding on the Mono and where the same cylinders are fitted to the Trigear, that too. | |
| LG29 | LANDING GEAR LEVER KNOB | ||
| LG30 | BRAKE LEVER HANDLE | ||
| LG31 | REINFORCING TUBE | ||
| LG32 | REINFORCING TUBE | ||
| LOGO-12inch-DIAMETER | EUROPA LOGO 12inch | Auto-Trim, Leicester | |
| LP-1460HT | HI TOP WINDSCREEN SOLAR GRAY | None | Factory-made part only - but Member surplus? |
| LP-1460HT-BRONZE-(2402) | HIGH TOP WINDSCREEN BRONZE | None | Factory-made part only - but Member surplus? |
| M10 | X 35 M10 X 35 SKT HEAD CAPSCREW | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M10-BINX-NUT | M10 BINX SELF LOCKING NUT BZP | www.trfastenings.com/Products/Catalogue/Nuts/All-Metal-Self-Locking/Binx | Check steel grade |
| M10NYLOC | M10 NYLOCK NUT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M10X110 | M10 X 110 SKT HEAD CAPSCREW | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M10X130 | M10 X 130 SKT HD CAPSCREW | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M10X40 | M10 X 40 HEX HD BOLT STAINLESS STEEL | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M10X55 | M10 X 55 SKT HD CAPSCREW | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M12-NYLOC | M12 NYLOC NUT | Various Hardware outlets | Caution if not from a factory source - as the steel grade requirement is unclear |
| M12-WASHER | M12 PLATED WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M12X170 | M12 X 170MM HT BOLT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M4-NUT | M4 THIN NUT ZINC PLATED | Various hardware outlets | Caution if not from a factory source - as the steel grade requirement is unclear |
| M4-SPRING-WASHER | M4 SPRING WASHER | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M5NUT | M5 THIN NUT SS | Various hardware outlets | Caution if not from a factory source - as the steel grade requirement is unclear |
| M5NYLOC | M5 NYLOCK NUT | Various hardware outlets | Caution if not from a factory source - as the steel grade requirement is unclear |
| M5X60 | M5 X 60MM ST ST BOLT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M6X60 | BOLT - MS - ZNP | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M8NYLOC | M8 NYLOCK NUT | Various hardware outlets | Caution if not from a factory source - as the steel grade requirement is unclear |
| M8WASHER | M8 WASHER- PLAIN ZNP | none | Caution if not from a factory source - as the steel grade requirement is unclear |
| M8X100 | M8 X 100 BOLT ZNP | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M8X25HEX | M8 X 25mm BOLT | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M8X35BUTTON | M8 X 35 BUTTON HD SCREW | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| M8XM80 | M8 X 80MM LONG BOLT (PROP) | None | Caution if not from a factory source - as the steel grade requirement is unclear |
| MAIN-TUBE | 8.00 X 6 INNER TUBE STRAIGHT VALVE | VSE Aviation formerly Watts | Take care to buy the tube with the correct valve |
| MAIN-TYRE | 8.00 X 6 TYRE AIRTRACK | www.lasaero.com/products/article/W03EGRTJD | Monowheel Mainwheel Tyre (wide) |
| MAIN-TYRE-AIRTRACK | 7.00 X 6 TYRE AIRTRACK | www.lasaero.com/products/article/W03EGRTJD | Monowheel Tyre (narrow type) |
| MAIN-WHEEL | 8.00 X 6 WHEEL | Matco | |
| MCMC-4D | MASTER CYLINDER - FINGER BRAKE (for Tri GearFinger brakes) | Matco | |
| MG01A | TRI MAIN GEAR LEG | None | Factory-supplied part - but check for Member surplus? Made from EN45 then heat-treated |
| MG02 | TRI BRAKE TORQUE PLATE ASSY | None | Factory-supplied part only - but check for Members surplus |
| MG03P | TRI MAIN GEAR LEG SKT PORT | None | Factory-supplied part - but check for Member surplus? |
| MG03S | Tri MAIN GEAR LEG SKT STBD | None | Factory-supplied part - but check for Member surplus? |
| MIKALOR-40-43 | PIPE CLIP FOR TAIL PIPE | Westfield Fasteners | |
| MIX-CUP | MIXING CUP PINT | Easy Composites | |
| MIX-CUP-HALF-PINT | HALF PINT MIX CUP | Easy Composites | |
| MIX-STICK | MIX STICK | Easy Composites | |
| MMA5-8-105S | OIL COOLER ADAPTOR | Mocal make these | |
| MOD 60 Kit | FUEL GAUGE ASSEMBLY - FLOAT TYPE | ||
| MOD-33-KIT | WATER DRAIN VALVES KIT | ||
| MOD-42-AIRBOX | COLD AIR INTAKE KIT | ||
| MOD-43-TW-ASSY | NEW TAIL WHEEL ASSY | ||
| MOD-47-KIT | XS LUGGAGE BAY KIT | ||
| MOD-49-KIT | DUPLICATE FUEL FILTER KIT | ||
| MOD-50-KIT | PITOT/STATIC KIT | ||
| MOD-51-KIT | LANDING GEAR RETRACTION LEVER STRUT | ||
| MOD-52-KIT | CLASSIC WEIGHT UPGRADE KIT | ||
| MOD-53 | LONG RANGER TANK | ||
| MOD-54 | CRANKED CONTROL COLUMN ASSY | ||
| MOD-58 | TRIM TAB DRIVE PIN REPLACEMENT | None | Factory-only. Check if other Members carry a spare? |
| MOD-59 | NOSE WHEEL SHIMMY DAMPER MOD | ||
| MOD-61A-KIT | STALL WARNER (NEW BUILD) | ||
| MOD-61B-KIT | STALL WARNER (RETROFIT) | ||
| MOD-62 | 3/8inch REPLACEMENT TORQUE TUBE PINS | None | Factory-only. Check if other Members carry a spare? |
| MOD-63-KIT-MONO | PANEL CUTOUT WITH FASTENERS | ||
| MOD-63-KIT-NH | PANEL CUTOUT WITH FASTENERS (UNDRILLED PANEL CUTOUT) | ||
| MOD-63-KIT-TRI | PANEL CUTOUT WITH FASTENERS TRIGEAR | ||
| MOD-64-KIT | HI TOP MOD KIT DEEP WINDSCREEN (MOD 64B) | None | Factory-made part only - but Member surplus? |
| MOD-65-(MATCO)-KIT | FINGER BRAKE KIT MATCO MASTER CYLINDERS | ||
| MOD-66-KIT | GAS STRUT REPOSITIONING MOD | ||
| MOD-67-KIT | COCKPIT WIDTH INCREASE MOD | ||
| MOD-67-NO-AMPREG | COCKPIT WIDTH INCREASE MOD (NO AMPREG) | ||
| MOD-68-KIT | MONO TO CONVENTIONAL TAILDRAGGER KIT | ||
| MOD-69-KIT | WING TIE DOWNS | ||
| MOD-70-KIT | MASS BALANCE ARM MOD | ||
| MOD-70B | MASS BALANCE MOD WITH TP18 F | ||
| MOD-71-KIT | MOD 71 KIT | ||
| MOD-72-KIT | MOD 72 KIT | ||
| MOD-73-PLACARD | MOD 73 PLACARDS - SET 2 OFF | ||
| MOD-74-KIT | MOD 74 KIT | ||
| MOD-74-POST-MOD-52 | MOD 74 KIT FOR POST MOD 52 A/C | ||
| MOD-75-KIT | WING LEVELLING AUTOPILOT KIT | ||
| MOD-76-KIT | ALTITUDE HOLD AUTOPILOT KIT | ||
| MOD-77 | TAILWHEEL DRIVE (TRI) | ||
| MOD-77-(MONO) | TAILWHEEL DRIVE (MONO) | ||
| MOD-78-INC-RESINS | MOD 78 GLIDER WING MOD INC RESINS | ||
| MOD-78-KIT | GLIDER WING UPGRADE | ||
| MPG-10-35 | MANIFOLD PRESSURE GAUGE 2.25inch D 10-35IN | ||
| MPG-10-50 | MANIFOLD PRESSURE GAUGE 2.25inch 10-50IN | ||
| MPG-KIT | MANIFOLD PRESSURE GAUGE KIT | ||
| MPG-PLUMBING-KIT | MANIFOLD PRESSURE GAUGE PLUMBING KIT | ||
| MS-710 | FUEL CONDENSATE TRAP | ||
| MS20392-5C35 | PIVOT PIN | LAS & Others | |
| MS20392-5C37 | PIVOT PIN | LAS & Others | |
| MS21042-08 | STIFFNUT | www.lasaero.com/products/section/HW/ | |
| MS21042-3 | STIFFNUT #10-32 | LAS & Others | |
| MS21042-4 | STIFFNUT - 1/4inch | www.lasaero.com/products/section/HW/ | |
| MS21042-5 | STIFFNUT - 5/16inch | www.lasaero.com/products/section/HW/ | |
| MS21047-06 | Anchor NUT - 6-32 | www.lasaero.com/part/MS21047-L3/ | |
| MS21047-080 | Anchor NUT 1/8inch | www.lasaero.com/part/MS21047-L3/ | |
| MS21047-3 | Anchor NUT - 3/16inch | www.lasaero.com/part/MS21047-L3/ | |
| MS21047-4 | Anchor NUT 1/4 | www.lasaero.com/part/MS21047-L3/ | |
| MS21047-5 | Anchor Nut - 5/16 | www.lasaero.com/part/MS21047-L3/ | |
| MS21051-06 | Anchor NUT - 6-32 | LAS & Others | |
| MS21051-3 | Anchor NUT - 10-32 | LAS & Others | |
| MS21051-L4 | SINGLE LEG Anchor NUT | LAS & Others | |
| MS21919-D10 | P CLIP | LAS & Others | |
| MS21919-D20 | P CLIP | LAS & Others | |
| MS24665-153 | SPLIT PIN | LAS & Others | |
| MS24693-S272 | SCREW | www.lasaero.com/products/section/HW/ | |
| MS24693-s274 | CSK SCREW - 3/16inch X 3/4inch LONG | www.lasaero.com/products/section/HW/ | |
| MS24694-S105 | 1/4 UNF CSK SCREW | www.lasaero.com/products/section/HW/ | |
| MS24694-S106 | CSK SCREW | www.lasaero.com/products/section/HW/ | |
| MS24694-S58 | BOLT | www.lasaero.com/products/section/HW/ | |
| MS27039-0808 | SCREW | www.lasaero.com/products/section/HW/ | |
| MS33737-16C | TINNERMAN NUT - INSTRUMENT PANEL | LAS & Others | |
| MS35207-266 | MACHINE SCREW | www.lasaero.com/products/section/HW/ | |
| MS35214-29 | 6-32 X 3/4inch BRASS SCREW | LAS & Others | |
| MS35214-31 | 6-32 X 1inch BRASS SCREW | www.lasaero.com/products/section/HW/ | |
| MS35333-75 | LOCK WASHER | www.lasaero.com/products/section/HW/ | |
| MT02 | CUP WASHER - ENGINE MOUNT | None | Factory part only - but Member surplus? |
| MT03/3 | SPACER - ENGINE MOUNT | ||
| MT04 | VIBRATION ABSORBER - ENGINE MOUNTING FRAME | ||
| MTO1/914 | ENGINE MOUNTING FRAME (912 & 914) | ||
| MW4 | ROD END BEARING | www.lasaero.com/products/article/G00RPRE67 | |
| MW5 | ROD END BEARING | www.lasaero.com/products/article/K02ZSTR3H | |
| N04-112U-007P-000 | 1 1/4inch FUEL PRESSURE GAUGE | ||
| N04118U007P010 | 1 1/4inch DIFF PRESSURE GAUGE FOR 914 | ||
| N04218U007P000 | 2 1/4inch DIFF PRESS GAUGE | ||
| N1EU07D | SENDER 0-7PSI DIFFERENTIAL PRESSURE FOR 914 ENGINE | ||
| N1EU07G | SENDER 0-7PSIG FUEL PRESSURE FOR 912/912S ENGINE | ||
| N7193 | NITRILE LIPSEAL FOR 122BMC DTD585 | ||
| NA02 | LUG PLATE AILERON DRIVE | None | Factory-supplied part only - but check for Members surplus |
| NAS-1169C10 | WASHER-CSK-S.S. A3235028935 WA-10 | www.lasaero.com/products/section/HW/ | Tinnerman Washers (under e.g. cowling screws) |
| NAS1473-A3 | F1968-3 SEALED Anchor NUT | ||
| NG | ASSY NOSE GEAR ASSEMBLY | ||
| NG01 | NOSE GEAR ARTICULATION FRAME | ||
| NG03 | NOSE GEAR LEG | None | 1. Check for Member surplus? 2. Or review LAA Repair 16012 to G-CDBX which replaced a bent factory tube leg with 4130 tube sourced from Dynamic metals Ltd subsequently heat-treated to Rockwell C28-C33. |
| NG04 | NOSE GEAR FORK | ||
| NG05 | NOSE WHEEL SHIMMY DAMPER RING | ||
| NG06 | NOSE WHEEL AXLE (OLD STYLE) | ||
| NG06-NEW | NOSE WHEEL AXLE (NEW TYPE) | ||
| NG07 | NOSE WHEEL SPACER | ||
| NG08 | SHIMMY DAMPER PIN | None | Factory-only. Check if other Members carry a spare? This is the very short pin that hammers into the nosewheel fork upper surface to prevent the shimmy damper plastic disc from rotating whilst sandwiched in position. |
| NG09 | NOSE WHEEL AXLE NUT | None | Factory-made part only - but Member surplus? |
| Nose-Wheel-Bearing | NOSE WHEEL BEARING | ||
| NSP9640501S | WING WALK TAPE 6inch WIDE | ||
| OIL/12 | CONTI 12 MM OIL HOSE | 1/2inch bore - various | |
| OR1 | STRUT TOP FITTING | ||
| OR10 | SPACER | ||
| OR11 | SPRING | ||
| OR12 | SPRING | ||
| OR2/2 | XS NYLON OUTRIGGER LEG | ||
| OR3 | WHEEL FORK | ||
| OR4/7 | LATCH ARM | ||
| OR5 | PULL PUSH BAR | ||
| OR6 | STOP BLOCK | ||
| OR7A | LATCH BLOCK SPACER | ||
| OR7B | LATCH BLOCK | ||
| OR8 | SPACER | ||
| OR9 | SPACER | ||
| OWA1 | OUTRIGGER WHEEL ASSEMBLY | ||
| P/S-PLUMBING-KIT | PITOT-STATIC PLUMBING KIT | ||
| P34913114 | BELLEVILLE WASHER | www.springmasters.com/shop/p34913114/ | |
| P408-008 | 6.4MM NYLON P CLIP | ||
| P408-020 | 12.7MM NYLON P CLIP | ||
| PC01 | PLENUM CHAMBER (CLASSIC) | ||
| PC02 | PLENUM CHAMBER (XS) | ||
| PC03 | PLENUM CHAMBER HOSE | ||
| PEEL-PLY | PEEL PLY GREEN | Easy Composites | |
| PHENOLIC-PAD | PHENOLIC PAD | ||
| PL01A | LABEL - OCCUPANT WARNING | Or DIY labelling | |
| PL01B | LABEL - FUEL SELECTOR | Or DIY labelling | |
| PL01C | LABEL - THROTTLE | Or DIY labelling | |
| PL01D | LABEL - DO NOT .. FLIGHT PORT | Or DIY labelling | |
| PL01E | LABEL - DO NOT .. FLIGHT STBD | Or DIY labelling | |
| PL01F | LABEL - CONNECT PITOT | Or DIY labelling | |
| PL01G | LABEL - STALL WARNER | Or DIY labelling | |
| PL01H | PLACARD 58 LTRS | Or DIY labelling | |
| PL01J | PLACARD 9 LTRS | Or DIY labelling | |
| PL01K | PLACARD 15 GAL | Or DIY labelling | |
| PL01L | PLACARD 2½ GAL | Or DIY labelling | |
| PL02A | LABEL - FLAPS/LANDING GEAR | Or DIY labelling | |
| PL02B | LABEL - BRAKE PULL | Or DIY labelling | |
| PL03A | LABEL - PARK BRAKE | Or DIY labelling | |
| PL03B | LABEL - BRAKES PULL ON | Or DIY labelling | |
| PL04A | LABEL - MASTER/ALT (VERTICAL) | Or DIY labelling | |
| PL04B | LABEL - MASTER/ALT HORIZONTAL | Or DIY labelling | |
| PL04C | LABEL - FUEL PUMP 2 | Or DIY labelling | |
| PL04D | LABEL - ENG INST/FUEL PUMP 1 | Or DIY labelling | |
| PL04E | LABEL - ENGINE INST | Or DIY labelling | |
| PL04F | LABEL - VOLTS | Or DIY labelling | |
| PL04G | LABEL - OIL PRESS 2 - 5 | Or DIY labelling | |
| PL04H | LABEL - OIL TEMP 50 - 140 | Or DIY labelling | |
| PL04J | LABEL - COOLANT TEMP MAX 150 | Or DIY labelling | |
| PL04K | LABEL - OIL TEMP 50 - 130 | Or DIY labelling | |
| PL04L | LABEL - COOLANT TEMP MAX 135 | Or DIY labelling | |
| PL05A | LABEL - FLAPS UP / DOWN | Or DIY labelling | |
| PL05B | LABEL - AVIONICS MASTER | Or DIY labelling | |
| PL05C | LABEL - 7 C/B LABELS (FLAPS TO FUEL QTY) | Or DIY labelling | |
| PL06A | LABEL - STARTER / T/C | Or DIY labelling | |
| PL06B | LABEL - MAX RPM 5800 .... | Or DIY labelling | |
| PL06C | LABEL - MAX SL BOOST 0.35 | Or DIY labelling | |
| PL06D | LABEL - TCU - DO NOT TURN ... ...BOOST LIMIT | Or DIY labelling | |
| PL06E | LABEL - TCU | Or DIY labelling | |
| PL06F | LABEL - ALT WARN | Or DIY labelling | |
| PL06G | LABEL - START ENG'D | Or DIY labelling | |
| PL06H | LABEL - FLYDAT WARN | Or DIY labelling | |
| PL06J | LABEL - BLANK | Or DIY labelling | |
| PL06K | LABEL - LOW OIL PRESS | Or DIY labelling | |
| PL06L | LABEL - LO FUEL PRESS | Or DIY labelling | |
| PL06M | LABEL - LOW VOLTS | Or DIY labelling | |
| PL06N | LABEL - STALL WARN | Or DIY labelling | |
| PL06P | LABEL - GPS | Or DIY labelling | |
| PL06R | LABEL - ENG'D AUTOPILOT | Or DIY labelling | |
| PL06S | LABEL - LANDING GEAR UNSAFE | Or DIY labelling | |
| PL06T | LABEL - MAN PRESS MAX 38.4 | Or DIY labelling | |
| PL06V | LABEL - AUTOPILOT | Or DIY labelling | |
| PL06W | LABEL - EFIS | Or DIY labelling | |
| PL06X | LABEL - STARTER/EFIS | Or DIY labelling | |
| PLCD-170-04V | QUICK RELEASE FEMALE | ||
| PLCD-170-05V | QUICK RELEASE FEMALE | ||
| PLCD-220-04V | QUICK RELEASE MALE | ||
| PLCD-220-05V | QUICK RELEASE MALE | ||
| PMC-17-02 | FEMALE 1/8 COUPLING | ||
| PMC-17-04 | 6MM CONNECTOR | ||
| PMC-22-02 | MALE 1/8 COUPLING | ||
| PMC-22-04 | 6MM CONNECTOR | ||
| PMC22-03 | MALE 3/16inch COUPLING | ||
| PRO-805 | FUEL FILTER | www.demon-tweeks.com/uk/sytec-pro-flow-low-pressure-fuel-filter-243283/ | This is for the complete Sytec PRO805 filter unit, complete with 50-micron elements already fitted (but no retention spring) |
| PRO-896 | FUEL FILTER ELEMENTS X 3 | www.demon-tweeks.com/uk/sytec-replacement-filter-element-for-pro-flow-filters-fsepro896/ | This number is for the Sytec PRO896 replacement 50-micron elements only - which will fit into the PRO805 filter body. |
| PROP-BLADE-SET | WARP DRIVE TAPERED BLADES | warpdriveinc.com/ | Technical support (Nick and others) is very good. email: contact@warpdriveinc.com |
| PVPV-D | PARK BRAKE VALVE KIT | matcoals.com/product/parking-brake-valve-dual/ | |
| Q-CEL | CONSTRUCTION FILLER (MICRO) | ||
| RA018 | 1/8 NPT BLANKING PLUG | ||
| RAD-914 | 912/914 RADIATOR FOR NEW KIT | Autocool | Autocool33 Durham StScarboroughYO12 7PTDave Lee paid 375GBP for a replacement in July 2025 |
| REAMER | 16.5MM REAMER | Club Loans | The Club holds a few tools for loan including this. Contact the MODs sec to arrange |
| RED-TOP | RED TOP 25 BATTERY | ||
| REDUX | ARALDITE 420 A/B | www.lasaero.com/products/article/E01LLPDUZ | Whilst LAS reliably sell the larger 1.2kg packs, Silmid sell this in smaller tube packages - though you need to be a distributor to buy and would also need a metering-gun to use their tubes. INFO: Though NOT SPECIFIED by Europa in the design, 3M DP420 has very similar, even improved, performances and may be easier to obtain. |
| REGISTRATION-LETTERS | REGISTRATION MARKINGS | Vinyl-fabricators | |
| REPLACEMENT-SEALS | 122BMC DOT 3/4 | Kart-Components | |
| RG58C/U | ANTENNA CABLE | ||
| RP3 | PITCH TRIM INDICATOR | RC Allen | |
| RS2 | PITCH TRIM SWITCH | RC Allen | |
| S/L-NIPPLE | SOLDERLESS NIPPLE | ||
| S01/6 | 1/2inch HEADED BUSH | None | Factory - supplied part but check Members surplus? |
| S02/3 | SPAR CUP 1/2 HOLE | ||
| S03 | SPACER | ||
| S07/3 | 1/2inch SPAR PIN | None | Factory-supplied part only. Ask other Members if they carry a spare? |
| S08 | PIP PIN | None | Factory-supply for the moment. Ask if another Member carries a spare? |
| S09 | SPAR PIN LATCH | None | Factory-only. Check if other Members carry a spare? Also, this is a small Alu plate that retains the RH spar pin and could be hand-manufactured |
| SAFETY-HAMMER | LIFE HAMMER | ||
| SERVO | MAC TRIM TAB SERVO KIT | RC Allen? | |
| SEW-ON-BADGE | EUROPA SEW ON BADGE LARGE | ||
| SK-Mono | MONOWHEEL SPEED KIT | ||
| SK-Tri-Gear | TRI-GEAR SPEED KIT | None | Factory-supplied full speed kit fairing parts as a kit- but check for Member surplus? |
| SK1 | FUSELAGE FLAP HINGE FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK10P | TRI PORT WHEEL FRONT FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK10S | TRI STB WHEEL FRONT FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK11 | TRI NOSE WHEEL AFT FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK12 | RI NOSE WHEEL FWD FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK13 | MAIN GEAR LEG FAIRING LEFT | None | Factory-supplied part - but check for Member surplus? |
| SK14 | MAIN GEAR LEG FAIRING RIGHT | None | Factory-supplied part - but check for Member surplus? |
| SK15 | NOSE GEAR LEG FAIRING LEFT | None | Factory-supplied part - but check for Member surplus? |
| SK16 | NOSE GEAR LEG FAIRING RIGHT | None | Factory-supplied part - but check for Member surplus? |
| SK17 | NOSE GEAR LEG FAIRING FRONT | None | Factory-supplied part - but check for Member surplus? |
| SK18 | MAIN FAIRING INNER BRACKET | None | Search for topic on Club website |
| SK19 | OUTBOARD SUPPORT | ||
| SK20 | NOSE WHEEL FAIRING BRACKET | None | Search for topic on Club website |
| SK2P | FLAP IN/PORT HINGE FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK2S | FLAP IN/STB HINGE FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK3 | FLAP MID HINGE FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK4 | OUTRIGGER HINGE FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK5 | OUTRIGGER WHEEL FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK6 | TAILWHEEL PORT FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK7 | TAILWHEEL STBD FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK8 | TRI OUTBOARD HINGE FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK9P | TRI PORT WHEEL REAR FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SK9S | TRI STBD WHEEL REAR FAIRING | None | Factory-supplied part - but check for Member surplus? |
| SMART-TOOL | ELECTRONIC SMART TOOL SENSOR MODULE | ||
| SP4Y-B3 | SHACKLE PIN 3/16inch DIA | www.lasaero.com/products/article/Q04HR1T0D | |
| SP4Y-B7 | CLEVIS PIN | ||
| SP90/F8 | 7/64inch SPLIT PIN - SS 1inch LONG | ||
| SPIROL6X55 | SPIROL PIN 6 X 55 MM MDK | ||
| sprl-cap-only-XS | XS NON LOCKING FUEL CAP | newtonsprl.co.uk/sprl/ | Newton Equipment also sell non-locking caps and the overhaul kit comprising sealing O-rings AERO300. These filler caps, which are easily left behind at the pumps, are widely sold by Motorsport suppliers too. They also sell the 95mm OD spigots that accept these 58mm OD flange caps, which bond into the fuselage |
| SPRL-L-G/S | XS FUEL CAP ASSY LOCKING | newtonsprl.co.uk/sprl/ | Newton Equipment also sell non-locking caps and the overhaul kit comprising sealing O-rings AERO300. These filler caps, which are easily left behind at the pumps, are widely sold by Motorsport suppliers too. They also sell the 95mm OD spigots that accept these 58mm OD flange caps, which bond into the fuselage |
| SPRL-L-M | XS LOCKING METAL FUEL CAP | newtonsprl.co.uk/sprl/ | Newton Equipment also sell non-locking caps and the overhaul kit comprising sealing O-rings AERO300. These filler caps, which are easily left behind at the pumps, are widely sold by Motorsport suppliers too. They also sell the 95mm OD spigots that accept these 58mm OD flange caps, which bond into the fuselage |
| SPRL-LOCKING | XS LOCKING FUEL CAP | newtonsprl.co.uk/sprl/ | Newton Equipment also sell non-locking caps and the overhaul kit comprising sealing O-rings AERO300. These filler caps, which are easily left behind at the pumps, are widely sold by Motorsport suppliers too. They also sell the 95mm OD spigots that accept these 58mm OD flange caps, which bond into the fuselage |
| SQ1 | SQUEEGEE -BODY FILLER SPREADER | ||
| SS502 | LP FUEL PUMP - FACET | www.mcgillmotorsport.com/ | Must be Facet type 40106 to conform to LAA flow and pressure requirements for the Rotax |
| STANDARD-PLACARD-SET | STANDARD PLACARD SET | None | Placard wording is defined in the Build Manuals. so as an alterative, buy your own labelling machine (a Brother P-Touch H300 works well) and replicate them. |
| T41780 | RUDDER CABLE TENSION SPRING | ||
| TACHO | ELECTRONIC TACHO | ||
| TAIL-TUBE | TAILWHEEL TUBE - 2.50 X 3 | ||
| TAIL-TYRE | TAILWHEEL TYRE - 2.50 X 3 | ||
| TAPD46BS | RIVET | LAS & others | |
| TAPK33BS | POP RIVET | LAS & others | |
| TAPK36BS | POP RIVET | LAS & others | |
| TBG-PLUMBING-KIT | TURBO BOOST GAUGE PLUMBING KIT | ||
| TGFL26 | SPACER | ||
| TGTW05 | BRAKE TOE BLOCK | ||
| TGW1 | STRAP | ||
| TGW21 | CONNECTOR PLATE | ||
| TH01 | THROTTLE BOX MOULDING | None | Factory-supplied part - but check for Member surplus? |
| TH02 | THROTTLE LEVER | ||
| TH03/04-1.6M | THROTTLE CABLE | cable-tec.co.uk/ | Knowledge offered by D Glowa Jan 26: https://cable-tec.co.uk/ were very reasonable. For 35GBP they copy your old ones as required. Emphasise the need to stick to the diameters and thicknesses of the eye to ensure a like for like. https://www.venhill.co.uk/ have also been mentioned by others. |
| TH05 | SPACER | ||
| TH06 | THROTTLE IDLE STOP | ||
| TH07 | THROTTLE LEVER KNOB | ||
| Timken LM67000LA | Wheel bearings for Tri WHLW51L Main Wheels | Simply Bearings UK | Trigear mainwheel taper-roller bearings with integral seal - 4off required per aircraft. Fits the Matco WHLW51L Magnesium two-part wheel and Trigear MG leg. Manually pack with Lithium grease before use, and inspect annually. |
| TIRT1145L | 11 X 4.00 - 5 TYRE 8 PLY (VARIOUS GRADES AVAILABLE) | www.lasaero.com/products/category/C01J435K9/ | TriGear Nosewheel Tyre |
| TIRT500X5 | 500 X 5inch TYRE 4 PLY (VARIOUS GRADES AVAILABLE) | www.lasaero.com/products/article/W03EGRTJD | TriGear Mainwheel Tyre |
| TIRTU1145L | 11 X 4.00 - 5 INNER TUBE | www.lasaero.com/products/article/Y013H9XXP | TriGear Nosewheel Inner tube |
| TIRTU500X5 | INNER TUBE 500 X 5 Inches | www.lasaero.com/products/article/Y013H9XXP | TriGear Mainwheel Inner tube. Roland Schmidt advised 28th Jan 2026 on the Club WhatsApp group that the valve spec needs to be the long stem TR67 which is 55mm |
| TIRTU800X6/7 | 8X6 MAIN TUBE ANGLED | www.lasaero.com/products/article/Y013H9XXP | Monowheel Tyre Inner tube (two tyre widths) |
| TLPD419BS | POP RIVET | LAS & Others | |
| TLPD424BS | POP RIVET COMMERCIAL | LAS & Others | |
| TLPD429BS | POP RIVET | LAS & Others | |
| TLPD435BS | POP RIVET | LAS & Others | |
| TLPD440BS | POP RIVET | LAS & Others | |
| TLPD524BS | POP RIVET COMMERCIAL | LAS & Others | |
| TLPK424BS | POP RIVET | LAS & Others | |
| TLPK429BS | RIVET | LAS & Others | |
| TLPK435BS | RIVET | LAS & Others | |
| TOROID | FERRITE TOROIDAL CORE | ||
| TOTMP | MAP POCKET | ||
| TP-35 | DRIVE TUBE | ||
| TP-36 | DRIVE PLATE | None | Factory-supplied part only - but check for Members surplus |
| TP10 | NYLON DISTANCE PIECE | ||
| TP12C | DRIVE PIN | None | Factory-only. Check if other Members carry a spare? |
| TP13 | BUSH | None | Factory - supplied part but check Members surplus? |
| TP14A | TORQUE PIN OVERSIZE SHORT | None | Factory-only. Check if other Members carry a spare? |
| TP14B | TORQUE PIN OVERSIZE LONG | None | Factory-only. Check if other Members carry a spare? |
| TP14C | 3/8inch TORQUE TUBE PIN SHORT | None | Factory-only. Check if other Members carry a spare? |
| TP14C-10 | 10MM TORQUE TUBE PIN SHORT | None | Factory-only. Check if other Members carry a spare? |
| TP14D | 3/8inch TORQUE TUBE PIN LONG | None | Factory-only. Check if other Members carry a spare? |
| TP14D-10 | 10MM TORQUE TUBE PIN LONG | None | Factory-only. Check if other Members carry a spare? |
| TP14E | TORQUE PIN | None | Factory-only. Check if other Members carry a spare? |
| TP18/6 | T/P BALANCE ARM POST MOD 70 | ||
| TP19/1 | TAILPLANE COUNTERWEIGHT | ||
| TP19A/1 | TAILPLANE COUNTERWEIGHT | ||
| TP19B/1 | TAILPLANE COUNTERWEIGHT | ||
| TP21 | FLETTNER STRIP | ||
| TP36A | DRIVE PLATE BASE | None | Factory-supplied part only - but check for Members surplus |
| TP36B | CONNECTOR TUBE | ||
| TP38 | COLLAR | ||
| TP39 | BEARING BUSH | None | Factory - supplied part but check Members surplus? |
| TP4 | TORQUE TUBE | ||
| TP5 | INSERT TUBE | ||
| TP6/4 | SUPPORT TUBE | ||
| TPA01 | TAILPLANE TORQUE TUBE | ||
| TRI-CONVERSION-(NO | BRAKES) TRI CONVERSION KIT - NO BRAKES | ||
| TRI-CONVERSION-FINGER-BRAKES | TRI CONVERSION KIT - FINGER BRAKES | ||
| TRI-CONVERSION-TOE-BRAKES | TRI CONVERSION KIT - TOE BRAKES | ||
| TS01 | TRIM BELLCRANK BRACKET | None | Factory Only - but Member-held surplus? |
| TS02 | TRIM BELLCRANK BRACKET | None | Factory Only - but Member-held surplus? |
| TS03 | TRIM BELLCRANK | None | Factory Only - but Member-held surplus? |
| TS04A | TRIM DAMPER SHAFT | ||
| TS04B | FRICTION WASHER | None | Factory part only - but Member surplus? |
| TS04C | SPRING | ||
| TS05 | TRIM TAB LINK ROD | ||
| TS06 | TRIM LINK ROD BUSH | None | Factory - supplied part but check Members surplus? |
| TU1 | 6061-T6 - 1inch O.D. X .028inch WALL X 2M | ||
| TU2 | 2024 T3 - .5inch X .035inch X 28inch | ||
| TU21RM | PVC TUBE 3MM X 6MM | ||
| TU23RM | 6.5MM X 10MM POLYURETHANE TUBE | ||
| TU33RM | COPPER TUBE - 1/4inch OD X 22SWG | ||
| TU50RM | PVC TUBE 5MM X 8MM | ||
| TU55RM | NYLON BRAKE LINE 1/4inch OD | ||
| TYRE-VALVE-EX | TYRE VALVE EXTENSION | ||
| VAC-SYS-PLUMBING-KIT | VACUUM SYSTEM PLUMBING KIT | ||
| VACUUM-PUMP | VACUUM PUMP TO FIT ROTAX 91x | www.lasaero.com/products/article/J03V6VCWL | Rapco 215CC Vacuum pumps need an existing drive installed to the rear of the 91x engine gearbox |
| W11 | BRACKET | None | Factory Only - but Member-held surplus? |
| W12 | BRACKET | None | Factory Only - but Member-held surplus? |
| W13 | AILERON BELL CRANK | ||
| W14 | BEARING SPACER | None | Factory - supplied part but check Members surplus? |
| W15 | BELLCRANK STOP | None | Factory Only - but Member-held surplus? |
| W16P | BELLCRANK | None | Factory Only - but Member-held surplus? |
| W16S | BELLCRANK | None | Factory Only - but Member-held surplus? |
| W17 | END FITTING | ||
| W18 | WING FLAP PLATE | None | Factory-supplied part only - but check for Members surplus |
| W19 | FLAP HINGE CONNECTOR | ||
| W20 | FLAP HINGE CONNECTOR | ||
| W21 | FLAP HINGE CONNECTOR PLATE | ||
| W22 | PLATE | Factory-supplied part only - but check for Members surplus | |
| W23 | PLATE | None | Factory-supplied part only - but check for Members surplus |
| W24/7 | REAR WING PIN | None | Factory-only. Check if other Members carry a spare? |
| W25/4 | WING LIFT PIN - LE | None | Factory-only. Check if other Members carry a spare? |
| W25M78 | WING FWD PIN ( POST MOD 78) | None | Factory-only. Check if other Members carry a spare? |
| W26A | BODY - WING TE DRAG PIN FITTING | None | Factory-only. Check if other Members carry a spare? |
| W26B | SOCKET - WING TE DRAG PIN FITTING | None | Factory-only. Check if other Members carry a spare? |
| W26C | BARREL - WING TE DRAG PIN FITTING | None | Factory-only. Check if other Members carry a spare? |
| W27 | WING LE DRAG PIN FITTING | None | Factory-only. Check if other Members carry a spare? |
| W28 | WING LE SHEAR PIN MODIFIED | None | Factory-only. Check if other Members carry a spare? |
| W33-ASSY | PITOT/STATIC HEAD | ||
| W33C | STATIC HEAD INSERT | ||
| W34 | WING TE TIE ROD END FITTING | ||
| W35 | GUSSET PLATE | None | Factory-supplied part only - but check for Members surplus |
| W35A | GUSSET PLATE - UNDRILLED | None | Factory-supplied part only - but check for Members surplus |
| W36 | 4130-.75inch X .035inch-- 41inch LONG | ||
| W38 | STALL WARNER TUBE | ||
| W39 | END FITTING | ||
| W40 | HOLE CUTTER | ||
| W41 | TIE DOWN ASSEMBLY | ||
| WHLAN1H | MAIN WHEEL AXLE NUT | matcoals.com/product/axle-nut-castellated-hex-with-bearing-ring-1-25-16/ | Matco part |
| WHLBRL-1 | MATCO BRAKE RELINE KIT | Matco | |
| WHLD5 | BRAKE DISC FOR WHLW51L | Matco | |
| WHLNW501.25 | NOSE WHEEL INC BEARINGS | Matco | |
| WHLW51L | MAIN WHEEL INC BEARING & BRAKE | Matco | Part: https://matcoals.com/product/w51l/ Europa supplied their own torque reaction plate (so Matco's plate is not needed/used) Tech Manual: https://matcoals.com/wp-content/uploads/2023/04/W50_51-SERIES-MANUAL-REV-E.pdf |
| XA2 | LUG PLATE AILERON DRIVE | None | Factory-supplied part only - but check for Members surplus |
| XA4 | LEAD WEIGHT | ||
| XLG12A | RETRACTION LEVER SAFETY LATCH XS AIRCRAFT ONLY | ||
| XP-EUR006-01 | TRIGEAR INTERIOR KIT | Various Trim Cos | |
| XP-EUR006-02 | SEAT CUSHIONS PLAIN (SET 2 BACKS/BASES) | www.auto-trim.co.uk/ | Auto-Trim in Leicester have the Europa Seat cushion patterns and can make new for you or repair existing. The contact (2015) is Darren |
| XP-EUR006-02 | SEAT CUSHIONS WITH ACCENT COLOUR (SET 2 BACKS/BASES) | Various Trim Cos | |
| XP-EUR006-03 | CLASSIC AIRCRAFT COVER LIGHT WEIGHT | Various Trim Cos | |
| XP-EUR006-04 | XS AIRCRAFT COVER LIGHT WEIGHT | Various Trim Cos | |
| XP-EUR006-05 | CONTROL STICK GAITERS - HIDE | Various Trim Cos | |
| XP-EUR006-07 | CENTRE CONSOLE - HIDE | Various Trim Cos | |
| XP-EUR006-08 | CENTRE CONSOLE - PVC | Various Trim Cos | |
| XP-EUR006-09 | TRIPLE AIR LUMBAR SUPPORT | Various Trim Cos | |
| XP-EUR006-10 | SEAT BOLSTER CUSHION 1inch | Various Trim Cos | |
| XP-EUR006-11 | SEAT BOLSTER CUSHION 2inch | Various Trim Cos | |
| XP-EUR006-12 | PROPELLER COVER (3 BLADES) | Various Trim Cos | |
| XP-EUR006-13 | WING COVERS (SET 2) XS | www.sky4pilots.co.uk | Sky4pilots will provide a 15% discount for Europa Club Members ordering from them. Use code EUROPA15 (valid 2025) |
| XP-EUR006-14 | INTERIOR KIT MONOWHEEL | Various Trim Cos | |
| XP-EUR006-15 | TAIL SECTION COVER | Various Trim Cos | |
| XS-912-FIREWALL-FWD-KIT | 912 FIREWALL FORWARD KIT | ||
| XS-912IS | XS 912IS FIREWALL FORWARD KIT - NEW FOR 2018 | ||
| XS-914-FIREWALL-FWD-KIT | 914 FIREWALL FORWARD KIT | ||
| XS-CS18P | RUDDER PEDAL PORT OUTER | ||
| XS-CS19P | RUDDER PEDAL PORT INNER | ||
| XS-F02A | LUGGAGE BAY BULKHEAD | ||
| XS-F17 | XS SPINNER CONE | None | Factory-supplied part - but check for Members surplus? |
| XS-F17A | XS SPINNER BACK PLATE | None | Factory-supplied part only - but check for Members surplus |
| XS-F17B | XS SPINNER FRONT PLATE | None | Factory-supplied part only - but check for Members surplus |
| XTW06 | XS TAIL WHEEL SPRING | ||
| XTW07-ASSY | TAIL WHEEL FORK ASSY | ||
| XTW08 | TAILWHEEL SPACER | ||
| XTW09 | RUDDER HORN | ||
| XTW10-ASSY | RUDDER STOP PLATE ASSY | None | Factory-supplied part only - but check for Members surplus |
| XTW11 | SLEEVE | ||
| XTW12 | NUT PLATE | None | Factory-supplied part only - but check for Members surplus |
| XTW13 | TAILWHEEL TOWING ARM SPACER | ||
| XTW14 | PORT RUDDER STOP PLATE | None | Factory-supplied part only - but check for Members surplus |
| XTW15 | TAILWHEEL SPRING SUPPORT PLATE | None | Factory-supplied part only - but check for Members surplus |
| Z0001 | Perspex Restorer Kit | Alt_supply_A | Commercially available from: |
| ZZ_45Deg Filler Hose | 51mm 45 Degree Hose Joiner Elbow | Merlin Motorsport | Part of the Fuel Filler Assembly. Be certain any flexible hoses made of silicone in the filler tube train are lined with the pea-green fuel resistant layer. |
| ZZ_912 Valve Cover o Ring ser | Valve Cover O Ring Set | ecclestonaviation.co.uk/product/881920-o-ring-set/ | Replacement if Valve Covers removed |
| ZZ_Blue Foam | 2lb per ft3 Styrofoam for Classics | www.panelsystems.co.uk/product/ravatherm-xps-x-sheets | Info courtesy David Morris G-BWYD Dow sold the Styrofoam side of their business to a company called Ravago. Their equivalent to the Styrofoam is called Ravatherm XPS supplied today by Panel Systems. It is available in an equivalent density at 33kg/m3 in the following sizes 2500x600x165mm 2534x620x165mm 1940x810x118mm 2150x600x150mm 2400x1200x115mm 3050x1220x115mm Classic builders may have some offcuts of the original stuff, of |
| ZZ_CP_Hose clips | Constant pressure hose clips | hcl-clamping.co.uk/collections/constant-tension-hose-clamps?gad_source=1&gad_campaigni | These are the constant pressure hose clips that are used by e.g. Rotax to secure the ends of the coolant circuit hoses between heads and water pump. Various sizes available from HCL |
| ZZ_Ducatti VR | Ducatti Voltage Regulator | specialaviationservices.co.uk/product/rectifier-regulator/ | The Std voltage regulator sent with Rotax engines |
| ZZ_Exh_Repairer_A | Philip George CAA Welder | www.airweld.co.uk/ | Contact Phil at phil@airweld.co.uk Phone no 07902 890532 Located in Hampshire SO21 2PP S527 patch material and 347S96 filler rod used - high temp stainless materials Used by John Amos (G-SNOZ) Sept 2026 to repair a blown CKT tight-radius downpipe. Cost approx 65GBP per hour plus shipping. Added 10-09-2026 |
| ZZ_Filler Hose clip | Stainless Steel Hose Clip 40-60mm | Merlin Motorsport | Part of the Fuel Filler Assembly. You need 4 of them. |
| ZZ_Firewall_Sealant | 1200C resistant flexible Mastic | www.naturalheating.co.uk/clear-envirograf-silicone-fireproof-sealant-temperature-range-40deg | As recommended by the LAA for firewall sealing. Minus 40 to Plus 1200C operating range. 4-hour protection. Clear colour. Its cartridge fits a std mastic gun. Was ~£25 UK-delivered in August 2026. Tested to BS476 Part 22 (1987) Tested at Fulmer Yarsley J84201/6 Tested at TRADA TFE95023 & RF 9500 Added 260826: C Sutton. |
| ZZ_FLAP_Motor | Flap motor and actuator | Motion Systems Corp actuator.com | This was for actuator as fitted to Trigear conversion from early 2000s. The linear actuators are still available, with or without the motor. The whole motor (with its two-start worm drive) is approx $200 but replacement brushes, held in their plastic enclosure and known as 'brush cards', can also be obtained for around $25 and are easily fitted if done carefully. PN for these is 79633-004. If you ask them nicely they can also include the small, square section, O-ring that seals the |
| ZZ_Fuel_Sender | Fuel_Sender | www.wema.co.uk/products/fuel-sender | another note |
| ZZ_Ignitech | Alternative to SMD Ign units | www.hadaircraft.co.uk | Stephen Wilkes of HadAircraft at Halfpenny Green is now the UK distributor for these Czech-made ignition units in the UK. Cs paid £540 delivered (UK Address) in Sept 2026. Contact No is 07930 927698 and email is hadaircraft.office@yahoo.com LAA SM15703 link here https://www.theeuropaclub.org/document/587. An unusual requirement is the need to email LAA Eng before fitting, to advise of mounting location even though its a Std Mod |
| ZZ_KC Master Cylinder Plug | Master Cylinder Filler Plug | www.kartcomponents.com/ | The Part Number shown is not on Website, send a message via the Contact us page to order the blanking plug(s), quoting part number KCB-301. This blanking plug is for the original Mono Kart Components Master Cylinder. Two are required, one for each brake line (on a Trigear). A 5mm Allen key is required to install it and the torque setting is 6Nm. |
| ZZ_L285 Resin | Low Viscosity Repair Resin | www.prfcomposites.com/sites/default/file | Recommended by composites repair experts - RS-L285 is a Low viscosity resin system for e.g. filling small delamination voids between blue foam and underside of Classic skins (eg per 247-FSB-002). Drill a small entry hole and a venting hole in the skin either end of the delam, mix then inject with a suitable syringe. Has a short pot life . . . |
| ZZ_NW_SpringW_Orig | Spacer Washer W61560 | www.springmasters.com/ | Spring Washer used on Trigear nose wheel. Two are specified in the build manual. |
| ZZ_Oil Filter and Gasket | 100hr Service Pack (No Oil) | ecclestonaviation.co.uk/product/100hr-service-pack-no-oil/ | Rotax 912 Oil Filter Oil Tank Sealing Gasket |
| ZZ_PlugCaps | Rotax Plug Caps | www.amazon.co.uk/NGK-VD05FMH-Plug-Cover/dp/B0068O7NSE | NGK 120-degree screw-on Spark Plug caps for all pre-2017 Engines |
| ZZ_PV50 A | PV50 Adapter | ems-ltd.com | This part is the collar that attaches the motor to the gearbox |
| ZZ_PV50 S | PV50 Screw | ems-ltd.com | This is the screw to attache the PV50 Collar to the Motor |
| ZZ_PV50_B | Pv 50 bearings and bushes overhaul parts | simplybearings.co.uk/shop/ | MB5040D Wrapped Steel Plain Bearing Bush50x55x40mm (3 needed)SS51110 Budget Stainless Single Thrust Ball Bearing50x70x14mm (3 needed)3mm Section 50mm Bore NITRILE 70 Rubber O-Rings (3 needed so 2 packs of 2)Bearing on the lead screw:61800-2Z SKF 10mm x19mm x 5mm |
| ZZ_PV50_M | PV50 Pitch Change Motor | ems-ltd.com | This is the motor to drive the Variable DC Pitch Propeller on the PV50. Detail provided by Bob Dawson on 260625 |
| ZZ_PV50_P | PV50 Pitch change motor pinion | ems-ltd.com | This is the pinion that attaches to the shaft of the PV50 DC pitch change Motor.Detail provided by Bob Dawson on 270625 |
| ZZ_Rotax Coolant Hose | 17mm ID On-engine hose | ecclestonaviation.co.uk/product/gates-17mm-water-hose-per-metre/ | EDPM 17mm Core coolant hose for the Primary coolant runs from cylinder heads, water pump—standard for Rotax 912/914 systems. Most installations apparently require 2 meters per engine, depending on hose-run layout. Rotax advise heat-protective tubing over the No1 and 2 cylinder hoses. |
| ZZ_Rotax Oil | ROTAX AEROSHELL SPORT PLUS 4 | ecclestonaviation.co.uk/product/aeroshell-sport-plus-4/ | Recommended oil for Rotax 912 Engines |
| ZZ_Rotax OIL Tank Cap | Pressure cap for Rotax OIL tank | www.blau.co.at/en/products/oil-caps/t63-b-40-g-ol-gd/ | Suggested by J Archer 221025. From what John has been able to ascertain, this is the reference of the Rotax oil tank cap supplied by Rotax. Check you get the right type of seal material (Viton probably better than HT silicone). This part can probably be obtained from other suppliers. https://www.blau.co.at/en/products/oil-caps/t63-b-40-g-ol-gd/ |
| ZZ_Rotax SMD | Rotax Ignition Modules | www.flyrotax.com/de/dis/franz | There are various flavours of SMD ignition modules all with different coloured labels. Check yours before ordering anything. Reportedly €510 each from this source. Soft-start modules can be over £1000 each from other (UK) sources |
| ZZ_Rotax_Rad Cap 1.2b | Rotax 1.2 bar Rad Cap | www.ktm-shop24.de/kuehlerverschluss-klein-1-2-bar-49035016000 | Alt Suppr A - Recommended by German Rotax expert Ralf Kleinjung (German supply source) Alt Suppr B - Eccelstone Aviation (Non-Rotax cap for ~£21) |
| ZZ_Schike GR6 | Schike GR6 voltage regulator | www.junkers-profly.de/GR-6b-O-Generator-Regler-mit-Ueberspannungsschutz::1239.html | UK supply has been interrupted but the AltA link points at a German supplier that shipped to the UK (Aug 2025). For UK guys, this is associated with LAA Std Mod 12970 to replace the Ducatti Regulator with the (more reliable?) Schike one. |
| ZZ_Straight Filler Hose | Samco ProFuel Silicone Coupling Hose | Merlin Motorsport | Part of the Fuel Filler Assembly. You need 2 of them. Be certain any flexible hoses made of silicone in the filler tube train are lined with the pea-green fuel resistant layer. |
| ZZ_Tri Brakepads | TriGear Brake Pad Reline Kit | matcoals.com/product/brake-reline-kit/ | This is the Matco WHLBRL-1 Brake relining kit for Trigear Matco mainwheel brakes Direct from Matco in the USA or via LAS Aerospace in the UK |
| ZZ_TriJackingBar | Tri Mainwheel leg jacking bar | ebay.us/m/pnPs7f | The Europa Tri Mainwheel legs have a 22.225mm hole in their ends suitable for inserting a jacking bar. CS has found that a 200mm length of 6082-T6 Aluminium bar with 100mm of one end turned down to 22.1mm, will suit. Mild steel bar (not tube) should also work |
| ZZ_Turnbuckle Clip | Turnbuckle Clip | www.lasaero.com/products/article/I03484X5J | Bob Dawson has some spare, contact if a couple required |
Anything presented here is for information purposes only, and not as a recommendation from the Europa Club. It is up to each individual to satisfy themselves as to the suitability of any parts for their individual aircraft.
© Copyright The Europa Club - all rights reserved
