Jon Smith “I solo-rig mine every time from a standard factory open trailer using a glider-style rigging aid/ trolley. The wing carrier on the trolley is pivoted to rotate the wing from the vertical to horizontal & VV. I lift the wing tip out of the trailer cradle into the trolley then wheel the wing around holding the spar end. When the wing is horizontal I stand to the rear of the spar and hold it with one hand on the spar and the other hand on the rear edge of the flap. Nice and stable to manage. I slide the spar into the fuselage using the spar guides for it to run along. I move the wing in as far as possible then go to the tip to push it fully home.”
